No problem Hans, already nice of you to respond so quickly. For completeness; I am using a virtual Linux environment which runs on my NAS.Wrt the CPU temperature, we'll look at that later. It is caused because you run on a PC and not an RPi. This means that the Debian apparently is a slightly different dialect on a PC and requires a different method to access the CPU temperature. I am currently busy doing a lot of other things wrt CMX and personal so this will be much later. Sorry for that.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
web tag errors after a refresh
Moderator: HansR
- Stigian
- Posts: 65
- Joined: Sun 22 Aug 2021 3:56 pm
- Weather Station: 6242EU Vantage Vue
- Operating System: Debian 12 (Bookworm)
- Location: Vaassen (NL)
- Contact:
Re: web tag errors after a refresh
- HansR
- Posts: 6058
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bookworm
- Location: Wagenborgen (NL)
- Contact:
Re: web tag errors after a refresh
Aha... you can work ahead in trying to find how to get the CPU temp if it is possible at all on that NAS. Just remind me in a few monthsStigian wrote: ↑Fri 05 Jan 2024 1:14 pmNo problem Hans, already nice of you to respond so quickly. For completeness; I am using a virtual Linux environment which runs on my NAS.Wrt the CPU temperature, we'll look at that later. It is caused because you run on a PC and not an RPi. This means that the Debian apparently is a slightly different dialect on a PC and requires a different method to access the CPU temperature. I am currently busy doing a lot of other things wrt CMX and personal so this will be much later. Sorry for that.
Hans
https://meteo-wagenborgen.nl
CMX build 4023+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4023+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
- Stigian
- Posts: 65
- Joined: Sun 22 Aug 2021 3:56 pm
- Weather Station: 6242EU Vantage Vue
- Operating System: Debian 12 (Bookworm)
- Location: Vaassen (NL)
- Contact:
Re: web tag errors after a refresh
Hi Hans,
I see no way to access the parent hardware from this virtual environment. Then again what good does it do to know what the parent temperature is
I see no way to access the parent hardware from this virtual environment. Then again what good does it do to know what the parent temperature is
- HansR
- Posts: 6058
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bookworm
- Location: Wagenborgen (NL)
- Contact:
Re: web tag errors after a refresh
OK... than it would be only useful to remove that CPU temp from the list in your case.
Detecting the Linux dialect would than be the issue.
Hans
https://meteo-wagenborgen.nl
CMX build 4023+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4023+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
- Stigian
- Posts: 65
- Joined: Sun 22 Aug 2021 3:56 pm
- Weather Station: 6242EU Vantage Vue
- Operating System: Debian 12 (Bookworm)
- Location: Vaassen (NL)
- Contact:
Re: web tag errors after a refresh
Hi Hans,
Requirment for CMX is the presence of a solar radiation sensor and the Vantage Vue lacks a Solar Radiation SensorYou will need to either set the evapotranspiration values somewhere or calculate those through CMX (advised, personally I think the Davis values are far too high)
- HansR
- Posts: 6058
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bookworm
- Location: Wagenborgen (NL)
- Contact:
Re: web tag errors after a refresh
Ah yes... Did not think of that, sorry.
Ok, so you can remove the EVT charts from the site
Hans
https://meteo-wagenborgen.nl
CMX build 4023+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4023+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3