b3263 realtime gauges not updating

[forestedge]

I have had to revert to b3248 again having had issues with php upload and realtime gauges not updating in b3257.
The updated php upload file in 3263 is now working, thanks Mark.

Unfortunately the realtime gauges problem from b3257 still exists, despite the diags showing the files are successfully uploaded.
b3263 Diags attached from last night.

[water01]

If the gauges are not updating then it must be a problem in your set up as I am using PHP and 3263 and my gauges are working fine, and I am sure other people would be mentioning it as well.

I think if you want the problem diagnosed you are going to have to go back to B3263 and switch on Data and Debug logging, and run it for 1/2 hr and then send us the resultant MXDiags file.

[mcrossley]

The log file above shows the realtime.txt and realtimeguages.txt files are being uploaded OK ?

It does show your extra files is trying to process files that do not exist.

And you are processing and uploading gaugesT.htm each period for some reason. I cannot see anything on the page that needs that.

The log does also show you have some issues in your day file though...

Code: Select all

2023-11-23 18:03:00.501 ParseDayFileRec: Error at record 4 - Input string was not in a correct format.
2023-11-23 18:03:00.501 LoadDayFile: Error at line 2550 of data\dayfile.txt : Error at record 4 = "12.00" - Input string was not in a correct format.
2023-11-23 18:03:00.501 Please edit the file to correct the error
2023-11-23 18:03:00.501 ParseDayFileRec: Error at record 4 - Input string was not in a correct format.
2023-11-23 18:03:00.501 LoadDayFile: Error at line 2579 of data\dayfile.txt : Error at record 4 = "10.00" - Input string was not in a correct format.
2023-11-23 18:03:00.501 Please edit the file to correct the error
2023-11-23 18:03:00.561 ParseDayFileRec: Error at record 9 - Input string was not in a correct format.
2023-11-23 18:03:00.561 LoadDayFile: Error at line 4017 of data\dayfile.txt : Error at record 9 = "" - Input string was not in a correct format.
2023-11-23 18:03:00.561 Please edit the file to correct the error

[forestedge]

The log file above shows the realtime.txt and realtimeguages.txt files are being uploaded OK ?

And you are processing and uploading gaugesT.htm each period for some reason. I cannot see anything on the page that needs that.

I have stopped the gaugesT.htm upload with no change.
Checking the files on the server, when 3263 runs, the realtimegauges.txt file may be shown as uploaded in diags but the file has not been updated and it would seem that there is a processing problem?

[freddie]

Could you attach your diags file to a reply to this topic, please? Developers will be able to spot several clues from these log files.

[forestedge]

Ran 3263 again and disabled Use GET for PHP small file uploads in settings. This has fixed the problem so all good now thanks!