Steve,
Remember a little while back I had a problem with Cumulus 1.7 were I would receive a error every time I started Cumulus, I sent you the data files which you corrected but I have noticed that the "Highest Monthly Rainfall" figure didn't reset on the records tab on my web page - so this is giving me a incorrect highest rain figure.
Can you tell me how I reset/clear this? You can reset everything else other than this on the "All Time Records Tab".
Please help.
Glen
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Clear "Highest Monthly Rainfall" On Records Tab
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Clear "Highest Monthly Rainfall" On Records Tab
Glen,
Cumulus works out the monthly rain total at startup by adding all the daily totals for this month in dayfile.txt, so it sounds like you still have some incorrect data in there. If you scan the file and refer to the format in the help file, you should be able to see where the problem is and correct it. If you need any help with that, please let me know.
Steve
Cumulus works out the monthly rain total at startup by adding all the daily totals for this month in dayfile.txt, so it sounds like you still have some incorrect data in there. If you scan the file and refer to the format in the help file, you should be able to see where the problem is and correct it. If you need any help with that, please let me know.
Steve
Steve