Cumulus 3.28.6 b3283 WeatherLink Live Reboot missing sensors

[Chris_Va]

Hello,

We have the latest Cumulus MX build with a WeatherLink Live data logger. Everything was working correctly until we rebooted the WLL. Now we don't have any outdoor temperature or barometric pressure readings. Wind speed/direction & indoor/outdoor humidity are working as well as indoor temperature. However, the pressure and outdoor temp show 0 (zero). I have reinstalled Cumulus MX (small update) and of course rebooted & restarted Cumulus. The WLL is uploading the current outdoor temp and pressure to Davis, so I think the WLL is working correctly. Cumulus just isn't getting that info. However, it is getting some info, so I think the networking is correct.

Any help is appreciated. Thank you

Chris

[mcrossley]

Switch on debug and data logging, let MX run for 10 mins, then you can switch the logging off again and post the latest MXdiags file. Thanks.

[Chris_Va]

Thank you very much for the reply and instructions. I will get this asap and post it. I am traveling today but will asap.

Chris

[Chris_Va]

Attach is the log file. Very sorry for the delay, this station is located at my parents home. Also, this isn't the station in my profile. This is a Davis Vantage Vu with Weatherlink Live.

Thank you
Chris

[mcrossley]

I'm not 100% sure what has gone wrong, but to get you going again please edit your Spike settings...

Settings > Calibration Settings:

Pressure: Spike=99999, Min=0, Max=99999
Outdoor Temperature: Spike=9999, Min=-20, Max=9999

And see if that works, if not post the MXdiags log file after making those changes

[Chris_Va]

Mark

Thank you, that fixed it. Do appreciate the help and the super quick response.

Chris