Davis Vantage Vue to update Cumulus
Posted: Sun 14 Jan 2024 9:52 am
Hello
After again.
I now have a problem with my Davis Vantage Vue with Davis Weatherlink USB logger which has abruptly ceased to upload data to Cumulus although the Console is updating and displaying correctly. A few days ago, in common with my normal practice, I closed Cumulus and then switched off the PC. Data was being received normally at this point. The following morning I restarted the PC and opened Cumulus as usual. From that moment it became apparent that no data was being transferred and the archive data I expected to be downloaded, didn't appear. My initial concern was triggered watching the download when instead of the message downloading archive and a percentage downloading, all I saw was downloading archive followed by dowloading archive twice but no percentages: hence no archive download. Cumulus told me it was running normally. The Dashboard continues to show the correct time and last Cumulus update which coincide but the last Station update is a series of zeros. No current data is shown on being updated and no gauges are working but the records and graphs pages are being populated with historic data.
The Latest errors page tells me repeatedly that WakeVP:***VP2 not woken.
I have taken the batteries out of the Console, removed the logger and left them without power for several hours and then reinserted batteries and logger. In the the interim I had closed Cumulus and restarted it. Result: no apparent contact between console/logger and Cumulus via PC.
Is it a possibilty that the logger has failed. Having done some research I can't find much infomration, if any, about checking whether a logger has failed.
Any suggestions please?
Tony
www.farleighmeadows.co.uk
After again.
I now have a problem with my Davis Vantage Vue with Davis Weatherlink USB logger which has abruptly ceased to upload data to Cumulus although the Console is updating and displaying correctly. A few days ago, in common with my normal practice, I closed Cumulus and then switched off the PC. Data was being received normally at this point. The following morning I restarted the PC and opened Cumulus as usual. From that moment it became apparent that no data was being transferred and the archive data I expected to be downloaded, didn't appear. My initial concern was triggered watching the download when instead of the message downloading archive and a percentage downloading, all I saw was downloading archive followed by dowloading archive twice but no percentages: hence no archive download. Cumulus told me it was running normally. The Dashboard continues to show the correct time and last Cumulus update which coincide but the last Station update is a series of zeros. No current data is shown on being updated and no gauges are working but the records and graphs pages are being populated with historic data.
The Latest errors page tells me repeatedly that WakeVP:***VP2 not woken.
I have taken the batteries out of the Console, removed the logger and left them without power for several hours and then reinserted batteries and logger. In the the interim I had closed Cumulus and restarted it. Result: no apparent contact between console/logger and Cumulus via PC.
Is it a possibilty that the logger has failed. Having done some research I can't find much infomration, if any, about checking whether a logger has failed.
Any suggestions please?
Tony
www.farleighmeadows.co.uk