Cumulus Support

Posted: **Fri 10 Nov 2023 2:53 am**

Seem to have issues with Wind Speed on my VP2 since I upgraded on 2nd.

Upraded all 3 of my stations to 3257.
Both Ecowitts on their own Pi's seem Ok, but the Davis VP2 connected to a Win10 Laptop is showing no Wind Speeds in either the Graphs or YADR since 02nd of November, (Upgraded before rollover on the 3rd).

https://weather.inverellit.com/datasumm ... ta=windspd

Noticed this in the Diags before a restart -0.1?

Code: Select all

2023-11-10 12:23:44.098 WaitForACK: ACK received
2023-11-10 12:23:44.113 LOOP2: Waiting for LOOP2 data
2023-11-10 12:23:44.133 LOOP2: Data packet is good
2023-11-10 12:23:44.133 LOOP2: Data - 4C-4F-4F-EC-01-FF-7F-65-75-FD-02-35-0E-03-06-FF-1D-01-27-00-33-00-0A-00-51-01-FF-7F-FF-7F-3D-00-FF-37-FF-4F-00-4E-00-5C-00-00-00-22-D6-04-AB-00-17-B4-37-00-00-00-00-00-5C-00-9A-00-02-45-00-D9-FF-7E-6D-C3-6D-B4-75-FF-09-07-15-12-03-07-05-13-0D-07-07-FF-7F-FF-7F-FF-7F-FF-7F-FF-7F-FF-7F-0A-0D-37-4F
2023-11-10 12:23:44.141 DoWind: gust=9.7, speed=-1.0 - Current: gust=41.8, speed=0.0
2023-11-10 12:23:44.143 DoWind: New: gust=41.8, speed=0.0, latest:9.7

Posted: **Fri 10 Nov 2023 3:00 am**

Latest Diags.

Posted: **Fri 10 Nov 2023 5:58 am**

I thought this was resolved with a reboot, but it's still an issue.

I can see Wind Speed varying on the VP2 Console, but the Gauge is remaining stuck in 14 km/h atm.

Posted: **Fri 10 Nov 2023 8:32 am**

Further Info,

Just shut down CMX & Ran a VP Live that's also on the host PC.
All appears normal.
The VP live reading tracks with the Console.

Restart CMX & it seems to take an initial reading & then sits on that value.

But this seems to be unique to the Win10/VP2; Both my Ecowitt's on Pi's are fine.

Posted: **Fri 10 Nov 2023 4:26 pm**

It sounds like the same problem as in this thread, the next build will have a fix, until then I suggest you revert to v3.26.0

Posted: **Fri 10 Nov 2023 8:56 pm**

Just need to Clarify the Best way to down grade.

I do have a copy of the complete Directory before backup.

Assume I can proceed like this:

Code: Select all

Rename Current Working Dir.
Rename Backup back to C:\CumulusMX\
Copy Data Dir to Working Dir above.
Do the same ini Cumulus.ini
Anything else I need to copy over the the Previous Versions Dir?

Posted: **Sat 11 Nov 2023 10:00 am**

That should do it, you do not need to copy the Cumulus.ini back though, the one in your backup will be fine.

Posted: **Sun 19 Nov 2023 8:47 pm**

Went back a version a few days ago & everything appeared fine again.

Website Realtime Gauges working & other data & charts now upgrading.

Noticed yesterday that the Console page is not receiving data though,
Ie Http://localhost:8998

Anyone suggest what the issue might be?

Cumulus Support

Wind Speed Issues since Upgrade.

Wind Speed Issues since Upgrade.

Re: Wind Speed Issues since Upgrade.

Re: Wind Speed Issues since Upgrade.

Re: Wind Speed Issues since Upgrade.

Re: Wind Speed Issues since Upgrade.

Re: Wind Speed Issues since Upgrade.

Re: Wind Speed Issues since Upgrade.

Re: Wind Speed Issues since Upgrade.