Hi
I am connecting my WS86861 (like WH10180 FineOffset) to Wunderground, it works fine but I am not able to send it the temp feels like so the wunderground value is the same as original temp.
I am trying to test WeatherCloud just in case it shows it correctly but I am facing problems to link CumulusMX/WC
I am using Raspberry Pi connected to my WS8681 station.
Thanks
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Wunderground upload Temp feels like
- mcrossley
- Posts: 12937
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Wunderground upload Temp feels like
AFAIK, the feels like temperature on Wund is calculated by them from the temperature, humidity and windspeed. There is no option to upload the value yourself.
Re: Wunderground upload Temp feels like
Thanks! however, it seems that it is not calculating it correctly, the “feels like” shows the same as the main temp when actually are 2-3C higher
I will send them a support request
I will send them a support request