Cumulus Support

All of my rain data is not appearing on my graphs and the 09.03.22 none of the data is appearing in the Monthly report. I recently had an issue with data being downloaded which was way off and had to reverse lots of fgures as it said 169mm fell in one hour their was a glitch which i had to rectify and ive probably done something. Help would be greatly appreciated as some great data from yesterday is not appearing.

What version of CMX are you running and can you post the latest .txt file from MXDiags for when the error occurred so we can find out what is going wrong.

Hey David,

Thanks - version 1.94 Build 10992.

Please find attached .txt files - Thanks for your help.

monksie wrote: ↑Fri 10 Mar 2023 12:52 pm version 1.94 Build 10992.

From your MXdiags file you are running this version:

Ok - I went to Help - About and thats where I got the information.

Thanks

The MX log file is from January. You will need to post the Cumulus 1 log file.

Okay, so it is a Cumulus 1 install. I thought it was MX based on the log file
I'll move this to the Cumulus 1 forum.

Hi how do I upgrade to newer version?

Thanks

monksie wrote: ↑Fri 10 Mar 2023 1:47 pm Hi how do I upgrade to newer version?

https://www.cumuluswiki.org/a/Migrating ... us_1_to_MX

Hi its very difficult to understand - I downloaded file and executed programme however command prompt type 'wizard.html' into browser its very confusing

You need to point your browser at the computer that you are running CumulusMX I.e.

http://192.168.0.94:8998/wizard.html or if you have installed on the same computer as you are running on

http://127.0.0.1:8998/wizard.html or you could also use http://localhost:8998/wizard.html

The dashboard should then display the Wizard so you can start to configure MX.

Note this will get you up and running with standard features but if in Cumulus 1 you were uploading Extra Files and other features you will have to work your way through setting them as you wish.

Hi sorry a bit above my paygrade - is their a video tutorial? Ive tried but cant.

I use an application not a browser?

No the CumulusMX Dashboard is accessed by a browser.

Load the default browser (usually MX Edge in Windows 10) and type in the URL from my previous post. There are no video tutorials but there is this Wiki tutorial I put together https://www.cumuluswiki.org/a/First_Run_of_MX

Thanks a million, I'll give it a try