I am running Cumulus 1.9.4 for 8-1/2 years. A couple weeks ago we had a power outage in this part of town that lasted for several hours. When the UPS was going to run out of battery power. I shut down the system.
Upon bring the system back online, I found the I could not communicate with my WeatherlinkIP Data Logger. I spent hours with Davis Instruments Tech Support and we finally got the Data Logger (IP Address 192.168.1.102) to finally show up in the router.
I can ping it and access via a browser, but I cannot get it to communicate with the Cumulus software. The Configuration file shows everything as expected. Except the diagnostic Information shows DNS:1 and Status:0. Tech support says that both should have a value of 0.
Their suggestion at this point in time was to run this past the Cumulus community support and see if anyone has any ideas here.
How can I get my Cumulus 1.9.4 to communicate with the Data Logger so I can get my website back up and running.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.0 (build 4022) - 11 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.0 (build 4022) - 11 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
What won't Data Logger communicate with Cumulus
- aznetcowboy
- Posts: 362
- Joined: Fri 04 Jan 2013 6:03 pm
- Weather Station: Davis 6153 Vantage Pro2
- Operating System: Windows 10 Home 64-bit
- Location: West Bend, WI USA
- Contact: