I was just looking at the webtags page here:
https://cumuluswiki.org/a/Webtags#Davis_WLL under the Davis WLL heading.
the wording of the functions seems slightly misleading
<#DavisTxRssi tx=1> = WLL WiFi RSSI
but this is the RSSI of the Transmitter (on channel 1) and not "WiFi" signal strength of the WLL. (WiFi is on 2.4Ghz)
this should be changed to:
<#DavisTxRssi tx=1> RSSI of Transmitter #1
AFAIK there is no known webtag for the WLL WiFi RSSI unless you look at the health Data in Weatherlink.com
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.0 (build 4022) - 11 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.0 (build 4022) - 11 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Change to Davis WLL Webtag wording
Moderator: HansR
- ConligWX
- Posts: 1652
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 24.04 LTS
- Location: Bangor, NI
- Contact:
Change to Davis WLL Webtag wording
You do not have the required permissions to view the files attached to this post.
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
- mcrossley
- Posts: 12862
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Change to Davis WLL Webtag wording
I've changed the Wiki, id=0 is the WiFi RSSI, and 1-8 are the transmitters.
- ConligWX
- Posts: 1652
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 24.04 LTS
- Location: Bangor, NI
- Contact:
Re: Change to Davis WLL Webtag wording
Mark, I dont suppose there is a Tag for the Primary power (PSU) voltage?
Thanks for the update
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
- mcrossley
- Posts: 12862
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Change to Davis WLL Webtag wording
No, I didn't add one for that. It gets logged in the log file every 15 minutes though - if debug logging is enabled
I suppose I could add a tag for it in the next release.
I suppose I could add a tag for it in the next release.
- ConligWX
- Posts: 1652
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 24.04 LTS
- Location: Bangor, NI
- Contact:
Re: Change to Davis WLL Webtag wording
Thank would be great yes. I noticed many of the packet tags for Davis WLL tend to be 0 values. is this just becuase there are no resends and no resyncs are needed? Only had the WLL less than 24hrs but seems to do its job very well.
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
- mcrossley
- Posts: 12862
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Change to Davis WLL Webtag wording
They do get non-zero values - here is mine now...
I have found that the transmitter reception is best with the "flat" side of the WLL facing the transmitter.You do not have the required permissions to view the files attached to this post.
- ConligWX
- Posts: 1652
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 24.04 LTS
- Location: Bangor, NI
- Contact:
Re: Change to Davis WLL Webtag wording
yes Just tried this now and reception improved from -67dB to -54-dB.
I also notice you have added WLL Supply voltage too in the 3.7.1 beta. Nice.
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0