Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Instructions: Installing CumulusMX on Raspberry Pi
Moderator: mcrossley
- HansR
- Posts: 6027
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bookworm
- Location: Wagenborgen (NL)
- Contact:
Re: Instructions: Installing CumulusMX on Raspberry Pi
Restore your windows machine to a previous system restore point?
Hans
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
-
- Posts: 45
- Joined: Wed 26 Feb 2020 2:14 pm
- Weather Station: Davis VP2
- Operating System: Raspberry Pi
- Location: Vancouver Island
Re: Instructions: Installing CumulusMX on Raspberry Pi
I figured it was most likely something that went wrong with the pi end of things since putty had worked fine for the previous half dozen times I'd used it.
I was wondering if there would be any way to confirm an error in the steps I took or troubleshoot to find out what's wrong. I could always start over but I was hoping not to have to go that route. Could I redo previous steps?
- HansR
- Posts: 6027
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bookworm
- Location: Wagenborgen (NL)
- Contact:
Re: Instructions: Installing CumulusMX on Raspberry Pi
You also wrote (previous message)wishmeluck wrote: ↑Thu 27 Feb 2020 2:39 pm I figured it was most likely something that went wrong with the pi end of things since putty had worked fine for the previous half dozen times I'd used it.
I was wondering if there would be any way to confirm an error in the steps I took or troubleshoot to find out what's wrong. I could always start over but I was hoping not to have to go that route. Could I redo previous steps?
That sound pretty much like windows to me.I think I messed up installing FIlezilla as I got a virus popup from Defender, to which I removed the "virus". I'm guessing I may have deleted a false positive and a critical file which messed something up...
And sure you can repeat any steps, but if you have no clue of what's the problem, you might just as well start over again. Especially because you can't get into the RPi again.
Maybe that's the best idea anyway because communicating trying to look for an error takes a lot of time. Trying all over, even two or three times might be a lot cheaper (in time). Learning by trial and error. Happens once in a while to the best.
Hans
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
-
- Posts: 214
- Joined: Tue 24 Nov 2015 11:30 pm
- Weather Station: Fine Offset & Davis Vantage Vue
- Operating System: Windows 10; Raspbian Buster
- Location: Switzerland
Re: Instructions: Installing CumulusMX on Raspberry Pi
The "Network error: connection timed out" means that Putty or Filezilla [you don't say which one is failing?] has failed to 'find' your Raspberry Pi.
Here are some things to try before starting again:
If your error during installation of Filezilla was the cause of the problem, Filezilla probably would not have run at all, and/or would not have been successful in communicating with the RPi in previous steps. So I'm doubtful that this is the cause. You could try uninstalling/reinstalling Filezilla, but that would not be my first step.
Have you got the wrong IP address for the RPi? Check that you have got it right. It is possible that your router has assigned a new IP address for some reason, so look again at your router's information and check you are using the correct IP address. Of course also be sure you are using the correct username and password (the updated one you chose earlier).
Or maybe you made an error in the step where you added the information about your WiFi network and password into the wpa_supplicant.conf file? If you gave the Rpi the wrong details, it will not have connected to your wifi - then not surprising that Filezilla or Putty does not find it, and when you looked at the router information in the step above, you will not see the RPi at all. If this is the case, you can just use your PC to add the wpa_supplicant.conf file onto the SD card again [the old copy will have disappeared]. It's OK to repeat this step at any time.
Good luck and fingers crossed!
Here are some things to try before starting again:
If your error during installation of Filezilla was the cause of the problem, Filezilla probably would not have run at all, and/or would not have been successful in communicating with the RPi in previous steps. So I'm doubtful that this is the cause. You could try uninstalling/reinstalling Filezilla, but that would not be my first step.
Have you got the wrong IP address for the RPi? Check that you have got it right. It is possible that your router has assigned a new IP address for some reason, so look again at your router's information and check you are using the correct IP address. Of course also be sure you are using the correct username and password (the updated one you chose earlier).
Or maybe you made an error in the step where you added the information about your WiFi network and password into the wpa_supplicant.conf file? If you gave the Rpi the wrong details, it will not have connected to your wifi - then not surprising that Filezilla or Putty does not find it, and when you looked at the router information in the step above, you will not see the RPi at all. If this is the case, you can just use your PC to add the wpa_supplicant.conf file onto the SD card again [the old copy will have disappeared]. It's OK to repeat this step at any time.
Good luck and fingers crossed!
-
- Posts: 45
- Joined: Wed 26 Feb 2020 2:14 pm
- Weather Station: Davis VP2
- Operating System: Raspberry Pi
- Location: Vancouver Island
Re: Instructions: Installing CumulusMX on Raspberry Pi
First off, thanks for your help with this.ExperiMentor wrote: ↑Thu 27 Feb 2020 11:24 pm The "Network error: connection timed out" means that Putty or Filezilla [you don't say which one is failing?] has failed to 'find' your Raspberry Pi.
Here are some things to try before starting again:
If your error during installation of Filezilla was the cause of the problem, Filezilla probably would not have run at all, and/or would not have been successful in communicating with the RPi in previous steps. So I'm doubtful that this is the cause. You could try uninstalling/reinstalling Filezilla, but that would not be my first step.
Have you got the wrong IP address for the RPi? Check that you have got it right. It is possible that your router has assigned a new IP address for some reason, so look again at your router's information and check you are using the correct IP address. Of course also be sure you are using the correct username and password (the updated one you chose earlier).
Or maybe you made an error in the step where you added the information about your WiFi network and password into the wpa_supplicant.conf file? If you gave the Rpi the wrong details, it will not have connected to your wifi - then not surprising that Filezilla or Putty does not find it, and when you looked at the router information in the step above, you will not see the RPi at all. If this is the case, you can just use your PC to add the wpa_supplicant.conf file onto the SD card again [the old copy will have disappeared]. It's OK to repeat this step at any time.
Good luck and fingers crossed!
Before you posted this I had decided to just go ahead and start over from the start. Unfortunately i got the exact same result which is where I'm at at this moment. I agree with you that I don't believe it to be an error with Filezilla either as it worked fine on the attempted reinstall.
I checked my IP address which hadn't changed.
As far as the correct username and password, well I can't even get to that point as it seems like putty can't even communicate with the RPI.
I ejected the sd card to check the wpa_supplicant.conf for ssid and password but I can't even see that under the boot drive any longer, does it get overwritten when installing Cumulus? Or is it located somewhere else now?
The last thing that went somewhat sideways on my that may have affected this was when I attempted to install Mono, I copied and pasted the code and hit enter. I don't recall exactly what it said but at the end something like it would require some disk space and asked if I wanted to proceed? Y/n
When I hit Y, it came back with: Abort
Thanks again for your assistance and encouragement.
Edit: Part of my problem was that I didn't use quotes for my wifi said and password so it's connecting now. I just can't seem to start Cumulus and still believe Mono didn't install correctly. Just my hunch.
-
- Posts: 214
- Joined: Tue 24 Nov 2015 11:30 pm
- Weather Station: Fine Offset & Davis Vantage Vue
- Operating System: Windows 10; Raspbian Buster
- Location: Switzerland
Re: Instructions: Installing CumulusMX on Raspberry Pi
Well that's the first step solved!
Yes, sounds like mono did not install. You can check by entering
pi@Cumulus:~ $ mono -V
Mono JIT compiler version 5.18.0.240 (Debian 5.18.0.240+dfsg-3 Sat Apr 20 05:16:08 UTC 2019)
Copyright (C) 2002-2014 Novell, Inc, Xamarin Inc and Contributors. www.mono-project.com
TLS:
SIGSEGV: normal
Notifications: epoll
Architecture: armel,vfp+hard
Disabled: none
Misc: softdebug
Interpreter: yes
LLVM: supported, not enabled.
Suspend: preemptive
GC: sgen (concurrent by default)
If mono isn't installed, you'll get an error message. You can try the mono installation step again. Needing to answer Y/n is expected, but there should not be an 'Abort' message.
Finally, yes it is normal for wpa_supplicant.conf to disappear after the RPi has booted. The RPi moves it to a different location.
Good luck
Yes, sounds like mono did not install. You can check by entering
which asks for the Version number and should respond something like:mono -V
pi@Cumulus:~ $ mono -V
Mono JIT compiler version 5.18.0.240 (Debian 5.18.0.240+dfsg-3 Sat Apr 20 05:16:08 UTC 2019)
Copyright (C) 2002-2014 Novell, Inc, Xamarin Inc and Contributors. www.mono-project.com
TLS:
SIGSEGV: normal
Notifications: epoll
Architecture: armel,vfp+hard
Disabled: none
Misc: softdebug
Interpreter: yes
LLVM: supported, not enabled.
Suspend: preemptive
GC: sgen (concurrent by default)
If mono isn't installed, you'll get an error message. You can try the mono installation step again. Needing to answer Y/n is expected, but there should not be an 'Abort' message.
Finally, yes it is normal for wpa_supplicant.conf to disappear after the RPi has booted. The RPi moves it to a different location.
Good luck
-
- Posts: 45
- Joined: Wed 26 Feb 2020 2:14 pm
- Weather Station: Davis VP2
- Operating System: Raspberry Pi
- Location: Vancouver Island
Re: Instructions: Installing CumulusMX on Raspberry Pi
I've tried reinstalling and I just keep getting the following without mono completing installation it seems.
Then
Any idea why this is happening?
Code: Select all
sudo apt-get install mono-complete
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
binfmt-support ca-certificates-mono cli-common libgdiplus libjs-xmlextras
libmono-2.0-1 libmono-2.0-dev libmono-accessibility4.0-cil
libmono-btls-interface4.0-cil libmono-cairo4.0-cil libmono-cecil-private-cil
libmono-cil-dev libmono-codecontracts4.0-cil
libmono-compilerservices-symbolwriter4.0-cil libmono-corlib4.5-cil
libmono-cscompmgd0.0-cil libmono-csharp4.0c-cil
libmono-custommarshalers4.0-cil libmono-data-tds4.0-cil libmono-db2-1.0-cil
libmono-debugger-soft4.0a-cil libmono-http4.0-cil libmono-i18n-cjk4.0-cil
libmono-i18n-mideast4.0-cil libmono-i18n-other4.0-cil
libmono-i18n-rare4.0-cil libmono-i18n-west4.0-cil libmono-i18n4.0-all
libmono-i18n4.0-cil libmono-ldap4.0-cil libmono-management4.0-cil
libmono-messaging-rabbitmq4.0-cil libmono-messaging4.0-cil
libmono-microsoft-build-engine4.0-cil
libmono-microsoft-build-framework4.0-cil
libmono-microsoft-build-tasks-v4.0-4.0-cil
libmono-microsoft-build-utilities-v4.0-4.0-cil
libmono-microsoft-build4.0-cil libmono-microsoft-csharp4.0-cil
libmono-microsoft-visualc10.0-cil
libmono-microsoft-web-infrastructure1.0-cil libmono-oracle4.0-cil
libmono-parallel4.0-cil libmono-peapi4.0a-cil libmono-posix4.0-cil
libmono-profiler libmono-rabbitmq4.0-cil libmono-relaxng4.0-cil
libmono-security4.0-cil libmono-sharpzip4.84-cil libmono-simd4.0-cil
libmono-smdiagnostics0.0-cil libmono-sqlite4.0-cil
libmono-system-componentmodel-composition4.0-cil
libmono-system-componentmodel-dataannotations4.0-cil
libmono-system-configuration-install4.0-cil
libmono-system-configuration4.0-cil libmono-system-core4.0-cil
libmono-system-data-datasetextensions4.0-cil
libmono-system-data-entity4.0-cil libmono-system-data-linq4.0-cil
libmono-system-data-services-client4.0-cil
libmono-system-data-services4.0-cil libmono-system-data4.0-cil
libmono-system-deployment4.0-cil libmono-system-design4.0-cil
libmono-system-drawing-design4.0-cil libmono-system-drawing4.0-cil
libmono-system-dynamic4.0-cil libmono-system-enterpriseservices4.0-cil
libmono-system-identitymodel-selectors4.0-cil
libmono-system-identitymodel4.0-cil
libmono-system-io-compression-filesystem4.0-cil
libmono-system-io-compression4.0-cil libmono-system-json-microsoft4.0-cil
libmono-system-json4.0-cil libmono-system-ldap-protocols4.0-cil
libmono-system-ldap4.0-cil libmono-system-management4.0-cil
libmono-system-messaging4.0-cil libmono-system-net-http-formatting4.0-cil
libmono-system-net-http-webrequest4.0-cil libmono-system-net-http4.0-cil
libmono-system-net4.0-cil libmono-system-numerics-vectors4.0-cil
libmono-system-numerics4.0-cil libmono-system-reactive-core2.2-cil
libmono-system-reactive-debugger2.2-cil
libmono-system-reactive-experimental2.2-cil
libmono-system-reactive-interfaces2.2-cil
libmono-system-reactive-linq2.2-cil
libmono-system-reactive-observable-aliases0.0-cil
libmono-system-reactive-platformservices2.2-cil
libmono-system-reactive-providers2.2-cil
libmono-system-reactive-runtime-remoting2.2-cil
libmono-system-reactive-windows-forms2.2-cil
libmono-system-reactive-windows-threading2.2-cil
libmono-system-reflection-context4.0-cil
libmono-system-runtime-caching4.0-cil
libmono-system-runtime-durableinstancing4.0-cil
libmono-system-runtime-serialization-formatters-soap4.0-cil
libmono-system-runtime-serialization4.0-cil libmono-system-runtime4.0-cil
libmono-system-security4.0-cil libmono-system-servicemodel-activation4.0-cil
libmono-system-servicemodel-discovery4.0-cil
libmono-system-servicemodel-internals0.0-cil
libmono-system-servicemodel-routing4.0-cil
libmono-system-servicemodel-web4.0-cil libmono-system-servicemodel4.0a-cil
libmono-system-serviceprocess4.0-cil
libmono-system-threading-tasks-dataflow4.0-cil
libmono-system-transactions4.0-cil libmono-system-web-abstractions4.0-cil
libmono-system-web-applicationservices4.0-cil
libmono-system-web-dynamicdata4.0-cil
libmono-system-web-extensions-design4.0-cil
libmono-system-web-extensions4.0-cil libmono-system-web-http-selfhost4.0-cil
libmono-system-web-http-webhost4.0-cil libmono-system-web-http4.0-cil
libmono-system-web-mobile4.0-cil libmono-system-web-mvc3.0-cil
libmono-system-web-razor2.0-cil libmono-system-web-regularexpressions4.0-cil
libmono-system-web-routing4.0-cil libmono-system-web-services4.0-cil
libmono-system-web-webpages-deployment2.0-cil
libmono-system-web-webpages-razor2.0-cil libmono-system-web-webpages2.0-cil
libmono-system-web4.0-cil
libmono-system-windows-forms-datavisualization4.0a-cil
libmono-system-windows-forms4.0-cil libmono-system-windows4.0-cil
libmono-system-workflow-activities4.0-cil
libmono-system-workflow-componentmodel4.0-cil
libmono-system-workflow-runtime4.0-cil libmono-system-xaml4.0-cil
libmono-system-xml-linq4.0-cil libmono-system-xml-serialization4.0-cil
libmono-system-xml4.0-cil libmono-system4.0-cil libmono-tasklets4.0-cil
libmono-webbrowser4.0-cil libmono-webmatrix-data4.0-cil
libmono-windowsbase4.0-cil libmono-xbuild-tasks4.0-cil libmonoboehm-2.0-1
libmonosgen-2.0-1 libmonosgen-2.0-dev libnunit-cil-dev
libnunit-console-runner2.6.3-cil libnunit-core-interfaces2.6.3-cil
libnunit-core2.6.3-cil libnunit-framework2.6.3-cil libnunit-mocks2.6.3-cil
libnunit-util2.6.3-cil mono-4.0-gac mono-4.0-service mono-csharp-shell
mono-devel mono-gac mono-jay mono-mcs mono-runtime mono-runtime-common
mono-runtime-sgen mono-utils mono-xbuild mono-xsp4 mono-xsp4-base
monodoc-base monodoc-http monodoc-manual
Suggested packages:
libgnomeui-0 libgamin0 libnunit-doc monodoc-nunit-manual monodoc-gtk-manual
monodoc-gecko-manual
Recommended packages:
libgluezilla
The following NEW packages will be installed:
binfmt-support ca-certificates-mono cli-common libgdiplus libjs-xmlextras
libmono-2.0-1 libmono-2.0-dev libmono-accessibility4.0-cil
libmono-btls-interface4.0-cil libmono-cairo4.0-cil libmono-cecil-private-cil
libmono-cil-dev libmono-codecontracts4.0-cil
libmono-compilerservices-symbolwriter4.0-cil libmono-corlib4.5-cil
libmono-cscompmgd0.0-cil libmono-csharp4.0c-cil
libmono-custommarshalers4.0-cil libmono-data-tds4.0-cil libmono-db2-1.0-cil
libmono-debugger-soft4.0a-cil libmono-http4.0-cil libmono-i18n-cjk4.0-cil
libmono-i18n-mideast4.0-cil libmono-i18n-other4.0-cil
libmono-i18n-rare4.0-cil libmono-i18n-west4.0-cil libmono-i18n4.0-all
libmono-i18n4.0-cil libmono-ldap4.0-cil libmono-management4.0-cil
libmono-messaging-rabbitmq4.0-cil libmono-messaging4.0-cil
libmono-microsoft-build-engine4.0-cil
libmono-microsoft-build-framework4.0-cil
libmono-microsoft-build-tasks-v4.0-4.0-cil
libmono-microsoft-build-utilities-v4.0-4.0-cil
libmono-microsoft-build4.0-cil libmono-microsoft-csharp4.0-cil
libmono-microsoft-visualc10.0-cil
libmono-microsoft-web-infrastructure1.0-cil libmono-oracle4.0-cil
libmono-parallel4.0-cil libmono-peapi4.0a-cil libmono-posix4.0-cil
libmono-profiler libmono-rabbitmq4.0-cil libmono-relaxng4.0-cil
libmono-security4.0-cil libmono-sharpzip4.84-cil libmono-simd4.0-cil
libmono-smdiagnostics0.0-cil libmono-sqlite4.0-cil
libmono-system-componentmodel-composition4.0-cil
libmono-system-componentmodel-dataannotations4.0-cil
libmono-system-configuration-install4.0-cil
libmono-system-configuration4.0-cil libmono-system-core4.0-cil
libmono-system-data-datasetextensions4.0-cil
libmono-system-data-entity4.0-cil libmono-system-data-linq4.0-cil
libmono-system-data-services-client4.0-cil
libmono-system-data-services4.0-cil libmono-system-data4.0-cil
libmono-system-deployment4.0-cil libmono-system-design4.0-cil
libmono-system-drawing-design4.0-cil libmono-system-drawing4.0-cil
libmono-system-dynamic4.0-cil libmono-system-enterpriseservices4.0-cil
libmono-system-identitymodel-selectors4.0-cil
libmono-system-identitymodel4.0-cil
libmono-system-io-compression-filesystem4.0-cil
libmono-system-io-compression4.0-cil libmono-system-json-microsoft4.0-cil
libmono-system-json4.0-cil libmono-system-ldap-protocols4.0-cil
libmono-system-ldap4.0-cil libmono-system-management4.0-cil
libmono-system-messaging4.0-cil libmono-system-net-http-formatting4.0-cil
libmono-system-net-http-webrequest4.0-cil libmono-system-net-http4.0-cil
libmono-system-net4.0-cil libmono-system-numerics-vectors4.0-cil
libmono-system-numerics4.0-cil libmono-system-reactive-core2.2-cil
libmono-system-reactive-debugger2.2-cil
libmono-system-reactive-experimental2.2-cil
libmono-system-reactive-interfaces2.2-cil
libmono-system-reactive-linq2.2-cil
libmono-system-reactive-observable-aliases0.0-cil
libmono-system-reactive-platformservices2.2-cil
libmono-system-reactive-providers2.2-cil
libmono-system-reactive-runtime-remoting2.2-cil
libmono-system-reactive-windows-forms2.2-cil
libmono-system-reactive-windows-threading2.2-cil
libmono-system-reflection-context4.0-cil
libmono-system-runtime-caching4.0-cil
libmono-system-runtime-durableinstancing4.0-cil
libmono-system-runtime-serialization-formatters-soap4.0-cil
libmono-system-runtime-serialization4.0-cil libmono-system-runtime4.0-cil
libmono-system-security4.0-cil libmono-system-servicemodel-activation4.0-cil
libmono-system-servicemodel-discovery4.0-cil
libmono-system-servicemodel-internals0.0-cil
libmono-system-servicemodel-routing4.0-cil
libmono-system-servicemodel-web4.0-cil libmono-system-servicemodel4.0a-cil
libmono-system-serviceprocess4.0-cil
libmono-system-threading-tasks-dataflow4.0-cil
libmono-system-transactions4.0-cil libmono-system-web-abstractions4.0-cil
libmono-system-web-applicationservices4.0-cil
libmono-system-web-dynamicdata4.0-cil
libmono-system-web-extensions-design4.0-cil
libmono-system-web-extensions4.0-cil libmono-system-web-http-selfhost4.0-cil
libmono-system-web-http-webhost4.0-cil libmono-system-web-http4.0-cil
libmono-system-web-mobile4.0-cil libmono-system-web-mvc3.0-cil
libmono-system-web-razor2.0-cil libmono-system-web-regularexpressions4.0-cil
libmono-system-web-routing4.0-cil libmono-system-web-services4.0-cil
libmono-system-web-webpages-deployment2.0-cil
libmono-system-web-webpages-razor2.0-cil libmono-system-web-webpages2.0-cil
libmono-system-web4.0-cil
libmono-system-windows-forms-datavisualization4.0a-cil
libmono-system-windows-forms4.0-cil libmono-system-windows4.0-cil
libmono-system-workflow-activities4.0-cil
libmono-system-workflow-componentmodel4.0-cil
libmono-system-workflow-runtime4.0-cil libmono-system-xaml4.0-cil
libmono-system-xml-linq4.0-cil libmono-system-xml-serialization4.0-cil
libmono-system-xml4.0-cil libmono-system4.0-cil libmono-tasklets4.0-cil
libmono-webbrowser4.0-cil libmono-webmatrix-data4.0-cil
libmono-windowsbase4.0-cil libmono-xbuild-tasks4.0-cil libmonoboehm-2.0-1
libmonosgen-2.0-1 libmonosgen-2.0-dev libnunit-cil-dev
libnunit-console-runner2.6.3-cil libnunit-core-interfaces2.6.3-cil
libnunit-core2.6.3-cil libnunit-framework2.6.3-cil libnunit-mocks2.6.3-cil
libnunit-util2.6.3-cil mono-4.0-gac mono-4.0-service mono-complete
mono-csharp-shell mono-devel mono-gac mono-jay mono-mcs mono-runtime
mono-runtime-common mono-runtime-sgen mono-utils mono-xbuild mono-xsp4
mono-xsp4-base monodoc-base monodoc-http monodoc-manual
0 upgraded, 175 newly installed, 0 to remove and 35 not upgraded.
Need to get 70.7 MB of archives.
After this operation, 237 MB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Abort.
Code: Select all
pi@raspberrypicumulus:~ $ mono -v
-bash: mono: command not found
- HansR
- Posts: 6027
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bookworm
- Location: Wagenborgen (NL)
- Contact:
Re: Instructions: Installing CumulusMX on Raspberry Pi
No idea, but I had this too. When rerun I just pressed 'Enter' (and thus using the default).
That worked for me. So: don't press 'Y' followed by 'Enter', just: 'Enter'.
That worked for me. So: don't press 'Y' followed by 'Enter', just: 'Enter'.
Hans
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
-
- Posts: 239
- Joined: Sat 13 Jun 2015 5:57 pm
- Weather Station: FineOffset WS3080
- Operating System: Debian Buster - Raspbian - Raspb
- Location: Germany - nearby Kassel
Re: Instructions: Installing CumulusMX on Raspberry Pi
sudo apt-get install -y mono-complete
...will not prompt for YES/NO
...will not prompt for YES/NO
-
- Posts: 214
- Joined: Tue 24 Nov 2015 11:30 pm
- Weather Station: Fine Offset & Davis Vantage Vue
- Operating System: Windows 10; Raspbian Buster
- Location: Switzerland
Re: Instructions: Installing CumulusMX on Raspberry Pi
This isn't the cause of your problem, but just to note it needs to be capital V inwishmeluck wrote: ↑Sat 29 Feb 2020 12:31 amCode: Select all
pi@raspberrypicumulus:~ $ mono -v -bash: mono: command not found
Code: Select all
mono -V
-
- Posts: 45
- Joined: Wed 26 Feb 2020 2:14 pm
- Weather Station: Davis VP2
- Operating System: Raspberry Pi
- Location: Vancouver Island
Re: Instructions: Installing CumulusMX on Raspberry Pi
Thanks for this, it worked for me!
Now I'm able to run putty to connect to the pi, I've opened the http://*:8998/ and get the Cumulus web interface.
I'm trying to set up a VP2 via a Weatherlink Live console so I configure the follwing...
Settings/Station settings/
Select my station type/
Select TCP/IP
Enter my WWL IP address
How do I find my TCP for the WWL?
Does this sound correct so far?
- mcrossley
- Posts: 12904
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Instructions: Installing CumulusMX on Raspberry Pi
You shouldn't need to, CumulusMX should find it for you. Assuming you mean WLL
-
- Posts: 45
- Joined: Wed 26 Feb 2020 2:14 pm
- Weather Station: Davis VP2
- Operating System: Raspberry Pi
- Location: Vancouver Island
Re: Instructions: Installing CumulusMX on Raspberry Pi
So I entered the IP for the Weatherlink Live but don't I have to enter a TCP value? Otherwise it says 0 and I get no station reporting.
Man I feel so close...but so far.
Edit: I'm not sure if I really understand the connection for devices now. Before I had the Pi I used Cumulus to connect to my laptop.
The VP2 connected to the WWL which then fed data to Cumulus running on my PC.
Now the VP2 connects to the WWL which will then feed data to the Pi? Then the data will be viewable from the Cumulus web interface on my PC?
I just don't have it straight in my mind unfortunately.
Last edited by wishmeluck on Sat 29 Feb 2020 7:06 pm, edited 1 time in total.
- mcrossley
- Posts: 12904
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Instructions: Installing CumulusMX on Raspberry Pi
Which TCP value? The port? CMX should automatically populate that with 22222 if you select the WLL as your station type.
-
- Posts: 45
- Joined: Wed 26 Feb 2020 2:14 pm
- Weather Station: Davis VP2
- Operating System: Raspberry Pi
- Location: Vancouver Island
Re: Instructions: Installing CumulusMX on Raspberry Pi
I still don't have a connection unfortunately. Do I have to configure anything under the Weatherlink Live in Cumulus like api's or anything?