I've had this station for many months now, back in Dec 2017, I notice that Barometer mb was stuck at 1013.2 on site..
So I contacted the seller and had a replacement transmitter sent out and installed today, still the same......
I'm now confused, Rel is 1013,2 hpa and abs is 000.0, it doesn't change on the console(WH3081)at all
Under cumulus it reads 1013.2 hpa all the time..
Please help....Is my station dead or have I stuffed up a setting somewhere(I've reset the console to defaults and cleared memory).
Where does it pickup the pressure from, console or transmitter???
I've attached the config from cumulus
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
WH3081 weather station pressure setting
- ace2
- Posts: 679
- Joined: Tue 14 Jan 2014 12:38 pm
- Weather Station: maxkon ws-1081pc
- Operating System: windows 7 & 8
- Location: Adelaide, south Australia, Australia
- Contact:
WH3081 weather station pressure setting
You do not have the required permissions to view the files attached to this post.
CHRIS
web site
http://www.ace2weather.com
Follow me on Twitter
http://tinyurl.com/kwlr9re
YouTube channel
http://tinyurl.com/lehwpgp
Facebook page
http://tinyurl.com/k3sap4s
Tiny URL links used
web site
http://www.ace2weather.com
Follow me on Twitter
http://tinyurl.com/kwlr9re
YouTube channel
http://tinyurl.com/lehwpgp
Facebook page
http://tinyurl.com/k3sap4s
Tiny URL links used
-
- Posts: 3402
- Joined: Wed 06 May 2009 6:29 pm
- Weather Station: Davis VP2 with Daytime FARS
- Operating System: Windows XP SP3
- Location: Cheadle Hulme, Cheshire, England
- Contact:
Re: WH3081 weather station pressure setting
Pressure is determined by the console. if it's not changing then I suspect a fault remains. No way will pressure not vary, even by small amounts.
You could use the Wunderground map to check pressure on nearby stations and use that to convince your supplier a problem exists.
You could use the Wunderground map to check pressure on nearby stations and use that to convince your supplier a problem exists.
-
- Posts: 136
- Joined: Sat 18 May 2013 1:58 pm
- Weather Station: Davis Vantage Pro2 with Solar
- Operating System: Windows 10 Home
- Location: NE Scotland
- Contact:
Re: WH3081 weather station pressure setting
You have a replacement transmitter and the problem remains.
I don't know the set up you have, but the Davis range have their pressure sensors in the
console/receiver.
Good idea, though, to compare what you should be getting with a local analysis map.
I don't know the set up you have, but the Davis range have their pressure sensors in the
console/receiver.
Good idea, though, to compare what you should be getting with a local analysis map.
- mcrossley
- Posts: 12903
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: WH3081 weather station pressure setting
The Fine Offset pressure sensor is also in console. You had the wrong part replaced.Altocumulus wrote:You have a replacement transmitter and the problem remains.
I don't know the set up you have, but the Davis range have their pressure sensors in the
console/receiver.
- ace2
- Posts: 679
- Joined: Tue 14 Jan 2014 12:38 pm
- Weather Station: maxkon ws-1081pc
- Operating System: windows 7 & 8
- Location: Adelaide, south Australia, Australia
- Contact:
Re: WH3081 weather station pressure setting
Time to battle the eBay seller again, took from Dec 2017 to get the transmitter which the seller suggested was at fault.
I had to threaten and use eBay support to give this guy a kick up the butt...
Wish me luck..............................
I had to threaten and use eBay support to give this guy a kick up the butt...
Wish me luck..............................
CHRIS
web site
http://www.ace2weather.com
Follow me on Twitter
http://tinyurl.com/kwlr9re
YouTube channel
http://tinyurl.com/lehwpgp
Facebook page
http://tinyurl.com/k3sap4s
Tiny URL links used
web site
http://www.ace2weather.com
Follow me on Twitter
http://tinyurl.com/kwlr9re
YouTube channel
http://tinyurl.com/lehwpgp
Facebook page
http://tinyurl.com/k3sap4s
Tiny URL links used
-
- Posts: 2
- Joined: Mon 19 Sep 2011 10:29 pm
- Weather Station: WS-2357, WS-2080
- Operating System: W10-Proff
- Location: Hampshire, UK
Re: WH3081 weather station pressure setting
Hi
Did you managed with pressure ?
I have the same error
" 1,013.31 hPa " !!!
Regards
Mike
Did you managed with pressure ?
I have the same error
" 1,013.31 hPa " !!!
Regards
Mike