Add Storm Rain to Rain Gauge Tooltip
Posted: Wed 05 Apr 2017 7:33 pm
In the last couple weeks I have managed to:
-Drop tenths from wind speed and temp gauge LCD's
-Darkened the green average wind "wedge" and the red wedges in all to match the daker red color of the hi/low pressure and theoretical solar max wedges.
-Changed layout of the gauges page
-Figured out how to make the "Other Temps" gauge load my choice by default
-Added Storm Rain to the web templates (easy) and to two of the interface pages (tougher as I had to create entries rather than just edit existing code)
-Purchased and setup a Raspberry Pi to include an Apache web server
That leaves my wish list with three items. I would prefer the amount of minor ticks in the wind scale to equal the amount of numbers between the major ticks. Has been discussed here already so I know that isn't happening.
Most of the gauges have an "Arrow Head" to show the high for the day or a shaded wedge to show the range for the day. Rainfall stays at it's amount until it resets at midnight. The exception is the UV Index - would like for the highest segment that illuminates during the day to stay there to indicate the high until it resets at midnight - I have know clue if or how this could be done so not obesessing on this one either.
The last item is to add "Storm Total" to the tool tip of the rain gauge. I *think* this would be relatively simple. I *think* this would require adding an entry to gaugefeed.js, language.min.js and gauges.js. The entry to the first two files seem straight forward and simple but I have experimented with trying to figure out what to add to gauges.js for several hours and am lost and defeated.
Can anyone offer any advice on how to accomplish this?
TIA - Herb
-Drop tenths from wind speed and temp gauge LCD's
-Darkened the green average wind "wedge" and the red wedges in all to match the daker red color of the hi/low pressure and theoretical solar max wedges.
-Changed layout of the gauges page
-Figured out how to make the "Other Temps" gauge load my choice by default
-Added Storm Rain to the web templates (easy) and to two of the interface pages (tougher as I had to create entries rather than just edit existing code)
-Purchased and setup a Raspberry Pi to include an Apache web server
That leaves my wish list with three items. I would prefer the amount of minor ticks in the wind scale to equal the amount of numbers between the major ticks. Has been discussed here already so I know that isn't happening.
Most of the gauges have an "Arrow Head" to show the high for the day or a shaded wedge to show the range for the day. Rainfall stays at it's amount until it resets at midnight. The exception is the UV Index - would like for the highest segment that illuminates during the day to stay there to indicate the high until it resets at midnight - I have know clue if or how this could be done so not obesessing on this one either.
The last item is to add "Storm Total" to the tool tip of the rain gauge. I *think* this would be relatively simple. I *think* this would require adding an entry to gaugefeed.js, language.min.js and gauges.js. The entry to the first two files seem straight forward and simple but I have experimented with trying to figure out what to add to gauges.js for several hours and am lost and defeated.
Can anyone offer any advice on how to accomplish this?
TIA - Herb