I have installed Cumulus and downloaded the extra cp210x converter. The converter does not install on my PC (win 7) and says it cannot find the cp210xmanufacturing.dll.
I have installed another programme from Silicon labs which I thought would fix this but it does not seem to do so...
Your link on this forum does not work for a copy of the cp210xmanufacturing.dll either!
Is there a way of connecting a USB Vantage Vue so that Cumulus can see it using Windows 7?
Two hours later...
I have found that if I put the downloaded file from Davis (CP210X_USB_Serial_Converter_ver2) into the same directory as the weatherlink software it runs properly ( by default it installs to c:\weatherlink). I wonder if you might find it helpful to add this to information to your information.
Thanks
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
cumulus cannot see vantage vue on usb
-
- Posts: 1
- Joined: Wed 09 Nov 2011 12:42 pm
- Weather Station: Vantage Vue
- Operating System: Windows 7
- Location: Usk
cumulus cannot see vantage vue on usb
Last edited by tommy1zulu on Wed 09 Nov 2011 2:05 pm, edited 1 time in total.