I am waiting for the delivery of the PMS5003 particle sensor to build into my weather setup.
I have googled to try and find the Ecowitt parameters to post to Cumulusmx.
Is there a list anywhere of all the Ecowitt parameters that can be sent as I seem to be looking in the wrong place...
Thanks for any pointers.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Air quality sensor(PMS5003) and Ecowitt posting id's
-
- Posts: 3292
- Joined: Sat 13 Aug 2011 9:33 am
- Weather Station: Ecowitt HP2551
- Operating System: Windows 10 64bit
- Location: Burnham-on-Sea
- Contact:
Re: Air quality sensor(PMS5003) and Ecowitt posting id's
One you have it in place the Ecowitt Gateway will automatically pick it and add it's readings to the data stream. Once CumulusMX sees it in the data stream it will pick up the data and it to the extra sensors area, Air Quality.
-
- Posts: 208
- Joined: Sun 03 Jan 2016 3:39 pm
- Weather Station: N96GY -but like Triggers Broom!!
- Operating System: Raspberry Pi4 Vers:11 Bullseye
- Location: Poundbury, Dorset
Re: Air quality sensor(PMS5003) and Ecowitt posting id's
Hi David,
Thanks but I put this in the homebuilt section because that is exactly what my setup is. (started as a lockdown project to preserve my retired senses )
No Ecowitt gateway as I am using a raspberry pi to receive the 443Mhz data directly from my old Maplins stand alone sensors and have added pressure and indoor temp and humidity sensors. I gather all this data using a python script and then post it to CumulusMX
What I am looking for is the keywords for the air quality parameters from the PMS5003 (which has just arrived !! ) ...
Sorry if I didn't make it clear
Thanks but I put this in the homebuilt section because that is exactly what my setup is. (started as a lockdown project to preserve my retired senses )
No Ecowitt gateway as I am using a raspberry pi to receive the 443Mhz data directly from my old Maplins stand alone sensors and have added pressure and indoor temp and humidity sensors. I gather all this data using a python script and then post it to CumulusMX
Code: Select all
weather_data={'dateutc' : time , 'solarradiation' : LuxW, 'uv' : UV , \
'tempf' : tempfahr ,'tempinf' : tempfahrinf ,'humidity' : humidity_send, 'baromrelin' : pressureinc , \
'windspeedmph' : wind_avg_mph , 'windgustmph' : wind_gust_mph ,'winddir' : wind_dir_EW, \
'rainratein' : rain_lh_inch, 'humidityin' : in_humidity, 'yearlyrainin' : rain_inch}
try:
x = requests.post( CMX_url , weather_data)
y = x.text.find('success')
Sorry if I didn't make it clear
-
- Posts: 208
- Joined: Sun 03 Jan 2016 3:39 pm
- Weather Station: N96GY -but like Triggers Broom!!
- Operating System: Raspberry Pi4 Vers:11 Bullseye
- Location: Poundbury, Dorset
Re: Air quality sensor(PMS5003) and Ecowitt posting id's
Sorry,
meant to post this when I was referred to it....
meant to post this when I was referred to it....
Code: Select all
https://weatherlink.github.io/airlink-local-api/
-
- Posts: 1125
- Joined: Sat 26 Feb 2011 1:58 pm
- Weather Station: Fine Offset 1080/1 & 3080
- Operating System: Windows XP SP3
- Location: SE London
Re: Air quality sensor(PMS5003) and Ecowitt posting id's
Hi,
Not a specific answer, but are you aware of the Weatherduino Project? Unfortunately it's not genuine "Open Source" (some sections of the forum are closed to "customers"), but he has been using AQI sensors since before it was a "mainstream" consideration. You may find some useful information on the sensors and their application, etc., but obviously not the "specifics" of the Ecowitt protocol.
Cheers, Alan.
Not a specific answer, but are you aware of the Weatherduino Project? Unfortunately it's not genuine "Open Source" (some sections of the forum are closed to "customers"), but he has been using AQI sensors since before it was a "mainstream" consideration. You may find some useful information on the sensors and their application, etc., but obviously not the "specifics" of the Ecowitt protocol.
Cheers, Alan.
-
- Posts: 208
- Joined: Sun 03 Jan 2016 3:39 pm
- Weather Station: N96GY -but like Triggers Broom!!
- Operating System: Raspberry Pi4 Vers:11 Bullseye
- Location: Poundbury, Dorset
Re: Air quality sensor(PMS5003) and Ecowitt posting id's
Thanks Alan,
I'll take a browse .....
I'll take a browse .....