Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4021) - 04 May 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4021) - 04 May 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Setting up data interval to match Cumulus
-
- Posts: 1
- Joined: Wed 24 Jul 2013 9:41 am
- Weather Station: Fine Offset WH1081 (Maplin)
- Operating System: Win 7 Ultimate
- Location: Ipswich, UK
Setting up data interval to match Cumulus
I've just installed a Fine Offset/Easy Weather system and want to use Cumulus. I believe I have seen a note previously about first setting the "data interval" in the Easy Weather software to match that in Cumulus, but I can't now find the instructions. Can anyone tell me in detail how to do it, please.
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Setting up data interval to match Cumulus
You can use my SetLogger utility, it's on the downloads page. Just unzip and run it (make sure no other software is connected to the station) and hopefully it will be self explanatory.
Steve
- Super-T
- Posts: 890
- Joined: Tue 09 Sep 2008 3:37 am
- Weather Station: wh-1081
- Operating System: Weather Laptop - Windows 10 Pro
- Location: Auckland, New Zealand
- Contact:
Re: Setting up data interval to match Cumulus
Setlogger works well with my WS1081 Fine offset console but it doesn't work with a spare Aercus WS1093 Fine Offset.
It seems to Connect OK but gives a 252 number when read from the Console, even after doing the SET.
Probably programming mismatch with this Aercus Model.
It seems to Connect OK but gives a 252 number when read from the Console, even after doing the SET.
Probably programming mismatch with this Aercus Model.
You do not have the required permissions to view the files attached to this post.
- mcrossley
- Posts: 12816
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Setting up data interval to match Cumulus
We don't have the source code for SetLogger, so it cannot be updated. Though it would be a little exercise if somebody wanted to write a new version