I've done a modified version of AnemometerTX.ino to add solar value to my VP2.
I think the RFM69 sendig are ok for that.
my actual config :
IIS with id=0 for temp/hum and rain
Transmitter id=1 for wind
Arduino Pro mini with RFM69 as IIS id=2 for Solar Rad
In WeatherLink i can't add a second IIS just for solar (only one is admitted) and i can't add a transmitter for solar, there no option for that.
Any though how i can add my solar value in the system ?
18 5 52-00-00-FF-71-00-62-00-00-43
Solar:478.00 / 1.758 = 271 = 0x10F << 6 43C0 packet3 and packet4 | 5 : 43C5
19 6 62-00-00-43-C5-00-82-00-00-FF
0 8 82-00-00-FF-C5-00-92-00-00-00
1 E E2-00-00-80-01-00-01-04-02-02
2 5 52-00-00-FF-71-00-62-00-00-43
3 4 42-00-00-FF-C5-00-52-00-00-FF
4 8 82-00-00-FF-C5-00-92-00-00-00
5 E E2-00-00-80-01-00-01-04-02-02
6 5 52-00-00-FF-71-00-62-00-00-43
7 9 92-00-00-00-05-00-A2-00-00-00
8 8 82-00-00-FF-C5-00-92-00-00-00
9 E E2-00-00-80-01-00-01-04-02-02
10 5 52-00-00-FF-71-00-62-00-00-43
Solar:478.00 / 1.758 = 271 = 0x10F << 6 0x43C0 packet3 and packet4 | 5 : 43C5
11 6 62-00-00-43-C5-00-82-00-00-FF
12 8 82-00-00-FF-C5-00-92-00-00-00
10 5 52-00-00-FF-71-00-62-00-00-FF
Solar:1761.00 / 1.758 = 1001 = 0x3E9 << 6 = 0xFA40 packet3 and packet4 | 5 : FA45
11 6 62-00-00-FA-45-00-82-00-00-FF
12 8 82-00-00-FF-C5-00-92-00-00-00
13 E E2-00-00-80-01-00-01-04-02-02
14 5 52-00-00-FF-71-00-62-00-00-FA
15 A A2-00-00-00-01-00-E2-00-00-80
16 8 82-00-00-FF-C5-00-92-00-00-00
17 E E2-00-00-80-01-00-01-04-02-02