V 1.9.4 build 1085
I have Cumulus set to start up on a reboot and it starts up but does not retrieve any data. All fields are 0. But, just shutting down and restarting and it connects and it gets and shows the data.
Any thoughts as to what is going on?
Thanks,
Bob
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4021) - 04 May 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4021) - 04 May 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Problems starting at Windows startup
-
- Posts: 13
- Joined: Mon 10 Oct 2016 1:38 pm
- Weather Station: WS 2080
- Operating System: Windows 10
-
- Posts: 214
- Joined: Tue 24 Nov 2015 11:30 pm
- Weather Station: Fine Offset & Davis Vantage Vue
- Operating System: Windows 10; Raspbian Buster
- Location: Switzerland
Re: Problems starting at Windows startup
I'd guess that when running at boot, Cumulus is starting before the weather station boots up (if not running 24/7) or before the USB ports are running, or something like that. Have a look in the 'diags' file which should list what Cumulus is doing- I bet it's not finding the weather station.
Can't you run Cumulus 24/7 on a Raspberry Pi to avoid this and be able to see everything in real time?
Can't you run Cumulus 24/7 on a Raspberry Pi to avoid this and be able to see everything in real time?