Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Cumulusmx does not recognize station wh1080
Moderator: mcrossley
-
- Posts: 40
- Joined: Wed 31 Jan 2018 5:00 pm
- Weather Station: Froggit WH1080SE
- Operating System: Win 10
- Location: Italy, near Milano
- Contact:
Cumulusmx does not recognize station wh1080
Good morning, sorry for my English and for the little experience as a programmer. I managed to install Cumulusmx and its start / stop script inside a raspberry pi with installed raspbian stretch lite. Works well. I reached the graphical interface of cumulus from the browser to associate the station (froggit wh1080) but Cumulus does not detect anything, the station data does not arrive, it is as if there were no connected stations. Tips ?
-
- Posts: 40
- Joined: Wed 31 Jan 2018 5:00 pm
- Weather Station: Froggit WH1080SE
- Operating System: Win 10
- Location: Italy, near Milano
- Contact:
Re: Cumulusmx does not recognize station wh1080
Mono JIT compiler version 4.6.2 (Debian 4.6.2.7+dfsg-1)
- ConligWX
- Posts: 1635
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 24.04 LTS
- Location: Bangor, NI
- Contact:
Re: Cumulusmx does not recognize station wh1080
I think you need a lower version of Mono (3.x) for the WH1080 fine offsets to work properly, it is mentioned here a few times on the forums.
Also can you confirm the rasbpi sees your Console by going to SSH and typing the following: lsusb
you should see something like so:
Also can you confirm the rasbpi sees your Console by going to SSH and typing the following: lsusb
you should see something like so:
Code: Select all
root@cumulusmx:~# lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 027: ID 8087:07dc Intel Corp.
Bus 001 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@cumulusmx:~#
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
-
- Posts: 40
- Joined: Wed 31 Jan 2018 5:00 pm
- Weather Station: Froggit WH1080SE
- Operating System: Win 10
- Location: Italy, near Milano
- Contact:
Re: Cumulusmx does not recognize station wh1080
lsusb command:
so I should do a downgrade of mono ?
I do not know if it can serve, but if I defect the following command, it seems that there are errors:
Code: Select all
pi@raspberrypi:~ $ lsusb
Bus 001 Device 004: ID 1941:8021 Dream Link WH1080 Weather Station / USB Missile Launcher
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I do not know if it can serve, but if I defect the following command, it seems that there are errors:
Code: Select all
pi@raspberrypi:~/CumulusMX $ sudo mono CumulusMX.exe
Current culture: English (United Kingdom)
Serial: 74FECEABEB2DA94ECB5EBA0CD11A7137
Cumulus MX v.3.0.0 build 3043
Today.ini = data/today.ini
Last update=2018-02-03T18:30:29
Looking for Fine Offset station, VendorID=0x1941 ProductID=0x8021
System.MissingMethodException: Method 'Mono.Unix.Native.Syscall.uname' not found.
at System.RuntimeType.InvokeMember (System.String name, System.Reflection.BindingFlags bindingFlags, System.Reflection.Binder binder, System.Object target, System.Object[] providedArgs, System.Reflection.ParameterModifier[] modifiers, System.Globalization.CultureInfo culture, System.String[] namedParams) [0x008a0] in <8f2c484307284b51944a1a13a14c0266>:0
at System.Type.InvokeMember (System.String name, System.Reflection.BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object target, System.Object[] args, System.Globalization.CultureInfo culture) [0x00000] in <8f2c484307284b51944a1a13a14c0266>:0
at HidSharp.Platform.Linux.NativeMethods.uname (System.String& sysname, System.String& release, System.String& machine) [0x00047] in <ae7920a0f15c43d292a5cc3a2fd0a936>:0
at HidSharp.Platform.Linux.NativeMethods.uname (System.String& sysname, System.Version& release, System.String& machine) [0x00004] in <ae7920a0f15c43d292a5cc3a2fd0a936>:0
at HidSharp.Platform.Linux.LinuxHidManager.get_IsSupported () [0x00002] in <ae7920a0f15c43d292a5cc3a2fd0a936>:0
Not supported
Fine Offset station not found
[ERROR] FATAL UNHANDLED EXCEPTION: System.Net.Sockets.SocketException (0x80004005): Address already in use
at System.Net.Sockets.Socket.Bind (System.Net.EndPoint localEP) [0x0004c] in <bd46d4d4f7964dfa9beea098499ab597>:0
at System.Net.EndPointListener..ctor (System.Net.HttpListener listener, System.Net.IPAddress addr, System.Int32 port, System.Boolean secure) [0x0004a] in <bd46d4d4f7964dfa9beea098499ab597>:0
at System.Net.EndPointManager.GetEPListener (System.String host, System.Int32 port, System.Net.HttpListener listener, System.Boolean secure) [0x000be] in <bd46d4d4f7964dfa9beea098499ab597>:0
at System.Net.EndPointManager.AddPrefixInternal (System.String p, System.Net.HttpListener listener) [0x00064] in <bd46d4d4f7964dfa9beea098499ab597>:0
at System.Net.EndPointManager.AddListener (System.Net.HttpListener listener) [0x00030] in <bd46d4d4f7964dfa9beea098499ab597>:0
-
- Posts: 2
- Joined: Sat 03 Feb 2018 2:11 pm
- Weather Station: PCE FWS 20
- Operating System: Raspbian
Re: Cumulusmx does not recognize station wh1080
To use correctply CumulusMX on Raspberry you need mono max at v.4.0.5, i've also the wh1080 and i do this procedure:
If you had installed mono, uninstall it with:
$ sudo apt-get remove mono-complete
The add the mono repository:
$ cd /etc/apt/sources.list.d
$ sudo vi mono-xamarin.list
add below line:
deb http://download.mono-project.com/repo/debian wheezy/snapshots/4.0.5 main
Go an Update Repo:
$ sudo apt-get update
Just ignore the warnings about signatures and conflicting distribution.
In order to fix dependencies, aptitude must be used to install mono:
$ sudo aptitude install mono-complete=4.0.5.1-0xamarin1
Then you will get a proposal from aptitude to solve the dependencies:
Keep the following packages at their current version:
1) Do NOT accept this solution, when that would install the current version of mono(4.6.2) which has errors (as documented by SpaceHiker).
Respond with "n"
2) Accept the next solution from aptitude to install mono version 4.0.5 with this warning:
Respond with "Y"
3) At the next prompt:
Respond with "Y"
4) At the last prompt:
Do you want to ignore this warning and proceed anyway?
To continue, enter "yes"; to abort, enter "no":
Respond "yes"
Now mono-complete 4.0.5 will be installed.
In order to protect this old mono version (4.0.5) from future upgrades:
$ sudo apt-mark hold mono-runtime mono-complete
How to show the current Installed version:
$ mono --version
It should respond with:
Mono JIT compiler version 4.0.5 (Stable 4.0.5.1/1d8d582 Thu Nov 12 12:22:41 UTC 2015)
Copyright (C) 2002-2014 Novell, Inc, Xamarin Inc and Contributors. www.mono-project.com
TLS: __thread
SIGSEGV: normal
Notifications: epoll
Architecture: armel,vfp+hard
Disabled: none
Misc: softdebug
LLVM: supported, not enabled.
GC: sgen
If you had installed mono, uninstall it with:
$ sudo apt-get remove mono-complete
The add the mono repository:
$ cd /etc/apt/sources.list.d
$ sudo vi mono-xamarin.list
add below line:
deb http://download.mono-project.com/repo/debian wheezy/snapshots/4.0.5 main
Go an Update Repo:
$ sudo apt-get update
Just ignore the warnings about signatures and conflicting distribution.
In order to fix dependencies, aptitude must be used to install mono:
$ sudo aptitude install mono-complete=4.0.5.1-0xamarin1
Then you will get a proposal from aptitude to solve the dependencies:
Keep the following packages at their current version:
1) Do NOT accept this solution, when that would install the current version of mono(4.6.2) which has errors (as documented by SpaceHiker).
Respond with "n"
2) Accept the next solution from aptitude to install mono version 4.0.5 with this warning:
Respond with "Y"
3) At the next prompt:
Respond with "Y"
4) At the last prompt:
Do you want to ignore this warning and proceed anyway?
To continue, enter "yes"; to abort, enter "no":
Respond "yes"
Now mono-complete 4.0.5 will be installed.
In order to protect this old mono version (4.0.5) from future upgrades:
$ sudo apt-mark hold mono-runtime mono-complete
How to show the current Installed version:
$ mono --version
It should respond with:
Mono JIT compiler version 4.0.5 (Stable 4.0.5.1/1d8d582 Thu Nov 12 12:22:41 UTC 2015)
Copyright (C) 2002-2014 Novell, Inc, Xamarin Inc and Contributors. www.mono-project.com
TLS: __thread
SIGSEGV: normal
Notifications: epoll
Architecture: armel,vfp+hard
Disabled: none
Misc: softdebug
LLVM: supported, not enabled.
GC: sgen
-
- Posts: 40
- Joined: Wed 31 Jan 2018 5:00 pm
- Weather Station: Froggit WH1080SE
- Operating System: Win 10
- Location: Italy, near Milano
- Contact:
Re: Cumulusmx does not recognize station wh1080
thank you scilab, I try
-
- Posts: 40
- Joined: Wed 31 Jan 2018 5:00 pm
- Weather Station: Froggit WH1080SE
- Operating System: Win 10
- Location: Italy, near Milano
- Contact:
Re: Cumulusmx does not recognize station wh1080
damn, my little experience stopped me, I can not add add below line:
deb http://download.mono-project.com/repo/debian wheezy / snapshots / 4.0.5 main
inside "mono-xamarin.list" I can not write or add anything and now I must have messed something up and I get this message out, sorry
deb http://download.mono-project.com/repo/debian wheezy / snapshots / 4.0.5 main
inside "mono-xamarin.list" I can not write or add anything and now I must have messed something up and I get this message out, sorry
Code: Select all
E325: ATTENTION
Found a swap file by the name ".mono-xamarin.list.swp"
owned by: root dated: Sun Feb 4 15:28:43 2018
file name: /etc/apt/sources.list.d/mono-xamarin.list
modified: YES
user name: root host name: raspberrypi
process ID: 925
While opening file "mono-xamarin.list"
(1) Another program may be editing the same file. If this is the case,
be careful not to end up with two different instances of the same
file when making changes. Quit, or continue with caution.
(2) An edit session for this file crashed.
If this is the case, use ":recover" or "vim -r mono-xamarin.list"
to recover the changes (see ":help recovery").
If you did this already, delete the swap file ".mono-xamarin.list.swp"
to avoid this message.
"mono-xamarin.list" [New File]
Press ENTER or type command to continue
-
- Posts: 40
- Joined: Wed 31 Jan 2018 5:00 pm
- Weather Station: Froggit WH1080SE
- Operating System: Win 10
- Location: Italy, near Milano
- Contact:
Re: Cumulusmx does not recognize station wh1080
I think I made a mess,
the error message for the swp file is still present,
if I uninstall mono-complete, the system tells me it's not there, but if I check the mono version, the system tells me that there 4.6.2 is still installed
the error message for the swp file is still present,
if I uninstall mono-complete, the system tells me it's not there, but if I check the mono version, the system tells me that there 4.6.2 is still installed
-
- Posts: 40
- Joined: Wed 31 Jan 2018 5:00 pm
- Weather Station: Froggit WH1080SE
- Operating System: Win 10
- Location: Italy, near Milano
- Contact:
Re: Cumulusmx does not recognize station wh1080
ok, sorry, I found other similar discussions, I try to solve
-
- Posts: 40
- Joined: Wed 31 Jan 2018 5:00 pm
- Weather Station: Froggit WH1080SE
- Operating System: Win 10
- Location: Italy, near Milano
- Contact:
Re: Cumulusmx does not recognize station wh1080
sorry I wanted a confirmation, the content of the file "mono-xamarin.list" is correct:
Code: Select all
pi@raspberrypi:/etc/apt/sources.list.d $ sudo vi mono-xamarin.list
deb http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5 main
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
"mono-xamarin.list" 1 line, 76 characters
-
- Posts: 40
- Joined: Wed 31 Jan 2018 5:00 pm
- Weather Station: Froggit WH1080SE
- Operating System: Win 10
- Location: Italy, near Milano
- Contact:
Re: Cumulusmx does not recognize station wh1080
I give up, I can not follow the guide
Code: Select all
pi@raspberrypi:~ $ cd /etc/apt/sources.list.d
pi@raspberrypi:/etc/apt/sources.list.d $ sudo vi mono-xamarin.list
pi@raspberrypi:/etc/apt/sources.list.d $ cd
pi@raspberrypi:~ $ sudo apt-get update
Hit:1 http://archive.raspberrypi.org/debian stretch InRelease
Hit:2 http://mirrordirector.raspbian.org/raspbian stretch InRelease
Ign:3 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5 InRelease
Ign:4 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5 Release
Ign:5 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main armhf Packages
Ign:6 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main all Packages
Ign:7 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main Translation-en_GB
Ign:8 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main Translation-en
Ign:5 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main armhf Packages
Ign:6 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main all Packages
Ign:7 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main Translation-en_GB
Ign:8 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main Translation-en
Ign:5 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main armhf Packages
Ign:6 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main all Packages
Ign:7 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main Translation-en_GB
Ign:8 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main Translation-en
Ign:5 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main armhf Packages
Ign:6 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main all Packages
Ign:7 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main Translation-en_GB
Ign:8 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main Translation-en
Ign:5 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main armhf Packages
Ign:6 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main all Packages
Ign:7 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main Translation-en_GB
Ign:8 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main Translation-en
Err:5 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main armhf Packages
404 Not Found
Ign:6 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main all Packages
Ign:7 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main Translation-en_GB
Ign:8 http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5/main Translation-en
Reading package lists... Done
W: The repository 'http://download.mono-project.com/repo/debian wheezy/snapshot/4.0.5 Release' does not have a Release file.
N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.
N: See apt-secure(8) manpage for repository creation and user configuration details.
E: Failed to fetch http://download.mono-project.com/repo/debian/dists/wheezy/snapshot/4.0.5/main/binary-armhf/Packages 404 Not Found
E: Some index files failed to download. They have been ignored, or old ones used instead.
pi@raspberrypi:~ $ sudo aptitude install mono-complete=4.0.5.1-0xamarin1
Unable to find a version "4.0.5.1-0xamarin1" for the package "mono-complete"
Unable to apply some actions, aborting
pi@raspberrypi:~ $
- ConligWX
- Posts: 1635
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 24.04 LTS
- Location: Bangor, NI
- Contact:
Re: Cumulusmx does not recognize station wh1080
there is no link called
http://download.mono-project.com/repo/debian%20wheezy/
it does not exist. where did you get that URL from?
http://download.mono-project.com/repo/d ... .0.5/main/
http://download.mono-project.com/repo/debian%20wheezy/
it does not exist. where did you get that URL from?
http://download.mono-project.com/repo/d ... .0.5/main/
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
-
- Posts: 40
- Joined: Wed 31 Jan 2018 5:00 pm
- Weather Station: Froggit WH1080SE
- Operating System: Win 10
- Location: Italy, near Milano
- Contact:
Re: Cumulusmx does not recognize station wh1080
I copied the link from the scilab post, the correct one is the one you told me?:
http://download.mono-project.com/repo/d ... .0.5/main/
http://download.mono-project.com/repo/d ... .0.5/main/
- ConligWX
- Posts: 1635
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 24.04 LTS
- Location: Bangor, NI
- Contact:
Re: Cumulusmx does not recognize station wh1080
try it and see, if it does not work then you will need to find the correct url for your device from within that link or find a new source.RunningEv wrote:I copied the link from the scilab post, the correct one is the one you told me?:
http://download.mono-project.com/repo/d ... .0.5/main/
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0