Cumulus Support

jlmr731

So you are seeing the process "mono CumulusMX.exe" shows 100% then goes up later to 200 and so on. I see your logging at 5 min increments but you say no data is being lost? Now i see this the first time is 2020-11-06 01:29:27.736 Sensor contact lost; ignoring outdoor data and repeats after...

jlmr731

beteljuice wrote: ↑Sun 01 Nov 2020 5:05 am @ jlmr731

You didn't check your map pin - wrong side of the World

I've corrected it for you

Yes thank you amazing what one little minus sign makes, now i updated so pin is on my house now.

jlmr731

Nice work
Thankin you

jlmr731

Not sure if this has been discussed about replacement of the wind bearing Cartridge for Davis VP. Mine stop spinning kinda been doing it for a while tried cleaning it but only last for a while, so I got a new one off amazon for $20 US and was very easy to install. Set screw for the cups and 1 philli...

jlmr731

Not sure what you will see but im thinking that you should see all the start up till normal running then any errors that come across. Is it needed NO it was just in response to a a post where there might be a need to see console output. I have yet to set it up so not even sure what is outputted to t...

jlmr731

@freddie: We only now must know where to find the console output and how to read it. Can that be done through the systemctl as well? Now I know its been said that there is a log file in MXdiag you can tail to see, but a thought on a systemd, or init.d script (either system should do this) to be abl...

jlmr731

OK, I think I see the problem with b3090, the issue is I do not have a TCP connected logger to test against so code changes in TCP are always risky. Mark if there is anything you want to test feel free to send it to me and ill test it out, what could possibly go wrong testing untested code? :lol:

jlmr731

Have you tried stopping cumulsmx, restart meteobridge, then starting Cumulus again? Yes that was one of the first things I did. It also loaded an updated firmware. Only thing I can think of is if The code changed seeing its a tcp connection for davis is that its trying to use the davis tcp logger i...

jlmr731

not really just sends data to other weather networks. its a tp-link mini router running open-wrt then the meteobridge software, i dont know if there is any data or something I could do to see what comes out. frrom the meteobridge site Vantage Pro including wind, rain, pressure, UV, solar radiation, ...

jlmr731

No It doesn't, its very strange. I would hook directly to it but to have a 50 foot usb cable run to the basement kinda wont work.
Mark if there is anything I can do to help or test out let me know.

jlmr731

Did an update to 3090 and I am using a meteobridge to connect to davis vantage pro and all updated to latest versions, vantage firmware at 3.8 and I remember a long while back had an issue with loop 2 and firmware fixed that so not sure what is happening. Of course update was to copy all of zip to i...

jlmr731

In general it sounds good, but parsing a file listing of what files were updated then coping them over sounds simple enough, but then that would entail Mark (or someone) to make a say a text file of just updated files, but now a problem can be what if someone skips a release or 2, or maybe if one go...

jlmr731

OK Cool, so looks like 3.7 will have a database upgrade too

jlmr731

Just updated to 3088 and noticed a few new files in the zip that was not included in 3087 or 3088 release update post, not sure if its work in progress or just missed adding them to post. No problems with anything else so far. Thanks a Million Mark The files Files with newer dates: these 2 had a dif...

jlmr731

Ok Mark had some time to play with this, not sure what to make of it, other than it goes through all of the davis logger (or meteobridge logger, not sure how that works, if its a pass through or it store it like the davis logger) After 6 minutes it ran fine, so is there a problem? I dont believe so ...

Cumulus Support

Search found 225 matches

Re: Stuck with high CPU usage after some days until restarted

Re: Map showing Cumulus users

Re: Map showing Cumulus users

Davis anemometer replacement

Re: Cumulus as a server - start/stop through init.d

Re: Cumulus as a server - start/stop through init.d

Re: no connection with build 3090

Re: no connection with build 3090

Re: no connection with build 3090

Re: no connection with build 3090

no connection with build 3090

Re: Update Script?

Re: 3088 other new files

3088 other new files

Re: v.3.6.10 build 3086 bug ?