Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Search found 113 matches
- Fri 10 Jul 2020 6:49 pm
- Forum: Weather
- Topic: New Record? Post here.
- Replies: 1122
- Views: 560568
Re: New Record? Post here.
4.83 inches of rain thanks to a glancing blow by TS Fay.
- Fri 10 Jul 2020 3:31 am
- Forum: Homebuilt
- Topic: Davis VP2 Relay Device
- Replies: 102
- Views: 131523
Re: Davis VP2 Relay Device
8 re-syncs is a lot more than I have seen - here are some numbers for the last 48 hours from mine. I didn't know that I could see the stats for each transmitter until I read the above post, so these figures from yesterday are only for the ISS/Moteino: Console 1: rx1 ISS - rx2 Wind - rx3 Extra Temp C...
- Mon 06 Jul 2020 8:13 pm
- Forum: Homebuilt
- Topic: Davis VP2 Relay Device
- Replies: 102
- Views: 131523
Re: Davis VP2 Relay Device
Upon closer inspection, I see that rain on rx1 is turned to "off" when I go back in to setup. I didn't notice it because the console displays 0.00 until there is some rain whether it's receiving or not. I checked and that happens with the 2017 files as well. I'm not going to go change any ...
- Mon 06 Jul 2020 6:37 pm
- Forum: Homebuilt
- Topic: Davis VP2 Relay Device
- Replies: 102
- Views: 131523
Re: Davis VP2 Relay Device
That fixed it. So far stats are excellent - will let it run and keep and eye on them.
Thanks again
Thanks again
- Mon 06 Jul 2020 5:40 pm
- Forum: Homebuilt
- Topic: Davis VP2 Relay Device
- Replies: 102
- Views: 131523
Re: Davis VP2 Relay Device
Aha - no I didn't. That section isn't in the old file so not in my notes.
I notice that solar is the only "0" in the default settings and that is the only field that populated - probably what my problem was.
I will do some editing and try again later.
Thanks
I notice that solar is the only "0" in the default settings and that is the only field that populated - probably what my problem was.
I will do some editing and try again later.
Thanks
- Mon 06 Jul 2020 3:01 pm
- Forum: Homebuilt
- Topic: Davis VP2 Relay Device
- Replies: 102
- Views: 131523
Re: Davis VP2 Relay Device
I had problems with the current github files as well. Originally with the 2017 files I had the console receiving only from the Adruino on rx3 and had the phantom gust problem reported earlier in this thread. I tried the new files and Arduino v1.8.13 software and had to copy files as iandrews listed ...
- Sat 04 Jul 2020 12:15 am
- Forum: Homebuilt
- Topic: Davis VP2 Relay Device
- Replies: 102
- Views: 131523
Re: Davis VP2 Relay Device
If in the console you define one transmitter as say wind, then it will ignore wind data from every other transmitter. I quit using my Moteino due to phantom wind gusts (and how much of a hassle it was to edit them out). IIRC I was receiving all data on the console via the Moteino set as tx3 and had...
- Tue 30 Jun 2020 4:35 pm
- Forum: Homebuilt
- Topic: Davis VP2 Relay Device
- Replies: 102
- Views: 131523
Re: Davis VP2 Relay Device
I didn't re-read this post, but I don't think this is mentioned....If you ever look at your console and want to see UV and solar the following applies. I have no idea about the Metobridge Pro (red), but according to Davis tech support if you plug the UV and solar sensors into your wireless anemomete...
- Thu 18 Jun 2020 2:19 am
- Forum: Cumulus MX Current (releases since b3043)
- Topic: What to Run MX on that is low resource os?
- Replies: 15
- Views: 2903
Re: What to Run MX on that is low resource os?
I got it up and going pretty simple. What is a easy way to share files between the pi and windows? If you are using Real VNC...there are two places to access the file transfer dialog. To go from Windows to the Pi use the one in the center top with two arrows pointing in each direction (not visible ...
- Wed 17 Jun 2020 2:23 pm
- Forum: Cumulus MX Current (releases since b3043)
- Topic: What to Run MX on that is low resource os?
- Replies: 15
- Views: 2903
Re: What to Run MX on that is low resource os?
If all you want is CumulusMX, you do NOT need the "Raspberry Pi OS (32-bit) with desktop and recommended software". So that narrows the choice to "Raspberry Pi OS (32-bit) with desktop" or "Raspberry Pi OS (32-bit) Lite". "Lite" does not have a GUI. The access...
- Wed 18 Mar 2020 6:19 pm
- Forum: Saratoga Templates
- Topic: Temperature only displaying to one decimal point
- Replies: 7
- Views: 3000
Re: Temperature only displaying to one decimal point
Try clearing your cache - it is working properly for me now.
- Thu 28 Nov 2019 2:18 pm
- Forum: Cumulus MX Current (releases since b3043)
- Topic: Standing at the precipice...
- Replies: 6
- Views: 1742
Re: Standing at the precipice...
Before you spend any $$$ on it (like buying a Win 7 license) - I would recommend researching Raspberry Pi if you haven't already. Cheap, tiny, silent and has been rock solid for me.
- Sun 01 Sep 2019 7:21 pm
- Forum: Cumulus MX Current (releases since b3043)
- Topic: Missing data on dashboard
- Replies: 40
- Views: 8340
Re: Missing data on dashboard
For another purpose (testing some hardware) I installed a brand new fresh download of Raspbian Buster from the official site (dated last month), installed mono-complete, and it installed version 5.18 for me? Raspbian Buster w/Desktop - 5.18 installed here as well. I used to force a newer version pr...
- Thu 22 Aug 2019 3:02 am
- Forum: Cumulus MX Current (releases since b3043)
- Topic: CumulusMX dashboard password protect
- Replies: 6
- Views: 1643
Re: CumulusMX dashboard password protect
You could edit the html to remove the settings related links. That doesn't block access to them, but you would have to know the address to manually access them rather than just clicking a link. I guess along those lines you could also delete the settings pages and just upload them when you need to u...
- Wed 05 Sep 2018 4:53 pm
- Forum: CumulusMX Beta (releases up to b3043 ONLY)
- Topic: Add Extra Temp Value to Interface Page
- Replies: 11
- Views: 10202
Re: Add Extra Temp Value to Interface Page
I initially had no luck getting this to do anything and moved on to trying to truncate numbers in my iframe method. After figuring out how to truncate my numbers using said iframe method of getting extra temp 1 to display I came back to this to try to figure out how to do it "right". I imm...