Cumulus Support

philpugh

FWIW this is the result of the command ip a (host is RPi 5 Debian 12) $ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ...

philpugh

Hans; I have a slight issue running 7003.. This is the start of the log with 7002 2024-05-20 11:45:02.119 Information According to Inifile Info => Error: True, Warning: True, Info: True, Verbose: False, 2024-05-20 11:45:02.125 CumulusUtils Initial: Shutting down the default listener 2024-05-20 11:45...

philpugh

This is for my longest running station. We are on a slight East facing slope and this seems to affect the temperature noticably. We are on the edge of what is known as Antrobus Moss - as it's name suggests a damp area!

AvTemp.png

As with Ray's there is no noticable trend.

philpugh

Forgot to mention. Take a copy of all your data files BEFORE you start this - just in case!

philpugh

dotnet appears to be installed ok but the first command Hans gave had a * in it the command should look like philpi5:~/WS68 $ ls -al Migr* -rw-r--r-- 1 phil phil 32256 May 13 11:49 MigrateData3to4.dll -rw-r--r-- 1 phil phil 143360 May 13 11:49 MigrateData3to4.exe -rw-r--r-- 1 phil phil 340 May 13 11...

philpugh

The software to migrate the data files to V4 is mentionedin the link Freddie gave. I would recomment studying that link fully BEFORE migrating. FWIW you can run V3 and V4 on the same machine so once you have copied and migrated your data files you can continue to log data with your working V3 set-up...

philpugh

@Ray: That's a good process!

philpugh

Mark: I am using PHP upload to local webserver (another RPi) for all three instances

EDIT to add screen shot of all processes associated with my CMX installation - lots of processes here!

philpugh

Her's my htop for RPi 5 8Gb 64bit Debian 12 running three instances of CumulusMX 4b4019. Not seen any memory problems wit this setup. System was 'rebooted' this am as we had a power cut!

philpugh

The 'loss' of data in the log : 2024-04-25 10:32:51.570 DoWind: latest=10.4, speed=5.0 - Current: gust=14.0, speed=6.5 2024-04-25 10:32:51.570 DoWind: New: gust=14.0, speed=6.5, latest:5.0 2024-04-25 11:10:22.674 Hour changed: 11 2024-04-25 11:10:22.674 Calculating sunrise and sunset times 2024-04-2...

philpugh

Dave, I have 3 Ecowitt station (WH65, WS68 and GW2001) and whilst the UV / Solar readings are in reasonable agreement I would not call them accurate. The problem with these 'inexpensive' weatherstations is that they measure the light level only and derive the W/sqM and UVI from generic formulas. Wha...

philpugh

Are you collecting data from the GW1100 with another instance of CMX? If so you should be able to 'export' the data either using the Extra Webfiles facility or if you are logging data to a database then extract the data from there for further processing.

philpugh

Three instances of b4019 running on RPi5 (64bit "bookworm") . No issues.

philpugh

b4019 working on RPi 5 (64bit Bookworm) with three instances running. No problems - at least with CMX

philpugh

@Hans Correct - just one of those things! Using the Ecowitt HP10 now!

Cumulus Support

Search found 388 matches

Re: CustomLogs as module

Re: CustomLogs as module

Re: What's your station's Average Temperature?

Re: How to start CumulusMX with dotnet in linux

Re: How to start CumulusMX with dotnet in linux

Re: How to start CumulusMX with dotnet in linux

Re: spam

Re: CMXv4 Memory usage

Re: CMXv4 Memory usage

Re: Ecowitt not constantly uploading to Cumulus

Re: Quality of data is the most important factor.

Re: Secondary rain gauge - how to access the data

Re: Beta Build 4019

Re: Beta Build 4019

Re: CUtils v7 upgrade notes