Cumulus Support

Cortmalaw

These are minor and not at all urgent! 1. Since the last time I updated Cumulus MX (in Dec 2023 - but I updated about 6 months worth of versions), the units have been missing from Alarm emails: Previously I got: "The temperature has fallen below 4 °C." Now I get: "The temperature has ...

Cortmalaw

Thanks everyone.

The hash check showed DOZENS of missing files, not just that one. So I know what to do!

My Mono JIT compiler is version 6.12.0.200 , so that's OK

Cortmalaw

Measure the size properly and buy them on EBay

Cortmalaw

Try using a hairdryer, or tyre inflation compressor!

Cortmalaw

Raspberry Pi Imager does not accept *.rar files (only works with *.img, *.zip, *.iso, *.gz, *.xz and *.zst) So @dazza1223 - please compress the image to an *.zip as before. Meanwhile, @BrunswickWeather could either unzip the *.rar before using it (that produces a file called baseimage-3.22.4.img, wh...

Cortmalaw

HansR has recently added External Sensor Handling into CumulusUtils
See viewtopic.php?t=20516

Cortmalaw

Well done Hans on making so much progress since I was last reminded to check back here! One thing I notice is that you still seem to have a suspiciously low background radiation count. In the photo, I don't see a 10nF blocking capacitor in the Pi the data connection wire between Geiger board and Pi....

Cortmalaw

Not sure what you've done differently! For 'devices' I get a list of multiple tablets, Raspberry Pis, laptops and desktop PCs that I have used to access Gmail over many years, as well as my phone. Have you NEVER accessed Gmail from Windows or other compuer before (maybe you have been using a mail pr...

Cortmalaw

Agree with water01. But note that with the Ecowitt range, you can choose separate sensors rather than (or in addition to) an Integrated Sensor Suite. You'll need to purchase a GW1100 WiFi gateway which picks up the sensor signals if you want to interface to CumulusMX. Once you have that, you can omi...

Cortmalaw

Further update: The Geiger tube is installed outdoors in the birdbox. It will be dark inside, though I did not take special effort to make it light-tight. There is a small but definite increase in count rate in parallel to increased light intensity. Same pattern each day, as can be seen at https://i...

Cortmalaw

After reboot I check "sudo systemctl status cumulusmx" and MX starts up but at the end of the report: When I ""sudo systemctl reboot cumulusmx" everything is fine. I'm not sure you've got these commands right (or maybe just not pasted them properly here) sudo systemctl stat...

Cortmalaw

@hintditte
I think you've posted in the wrong thread for help on this!

Suggest you search for an appropriate IPlink or WeatherLink thread and ask your question there.

Cortmalaw

I just came back to your post. The manual is of course very helpful, and the device looks versatile! Looking at around page 56, you'll see that issuing simple webpage requests from your laptop should be able to access whatever you want. For example, Capture update Snapshot of JPEG image /cgi-bin/vid...

Cortmalaw

2 photos attached.
The metal box attached with staples and gaffer tape is theparticle counter with its opening attached at the "bird entry hiole".
The third photo showing the Enviro+ screen visible through the aperture in the box bottom didn't come out.

Cortmalaw

A further progress report. The tube supplied with my board was a J305. I believe this is a clone/similar to SMB-20. There are details on the Canadian Walmart page https://www.walmart.ca/en/ip/J305-Geiger-Counter-Tube-Nuclear-Radiation-Detector-GM-Tube-Radiation-Monitor-Accessory/PRD4CWELGV7259G whic...

Cumulus Support

Search found 92 matches

Minor bugs in 'Alarms' emails

Re: b3269 - mono error preventing running

Re: Davis Prices

Re: Weather Stations

Re: Raspberry Pi image error in size

Re: Extra Sensors On The Main Webpage

Re: Geiger counter

Re: Email alerts with gmail account

Re: New PWS

Re: Geiger counter

Re: Instructions: The Quick Easy Cumulus MX Linux Installation and Running as a Service

Re: Instructions: Installing CumulusMX on Raspberry Pi

Re: Project Skip Find Web/weather Cam

Re: Geiger counter

Re: Geiger counter