Cumulus Support

AndyKF650

Hi Mark I have been receiving the following error messages at my host site every 15 minutes. I first noticed the error earlier today and after a couple of restarts it has not gone away. Perhaps you could let me know what line 332 in the upload file refers to. I am using the upload.php file release i...

AndyKF650

Hi Dazza

Bookworm 64 bit works well for me on a RPi v4 and has been running since November with no issues

AndyKF650

Hi Lance
When you replaced the battery a while back did you have the same problem as now or did the problem start well after the battery replacement and reset.

My cable from the meteopi to the RPi is less than a metre but unless your cable is very much longer I would not expect any issues

AndyKF650

If it helps I am using a Vantage Pro vp2 cabled set up with a meteo pi linking to a RPi 4 with no issues at all. One thought I had was often when all else fails turn everything off for 30 secs and then restart the VP2 then the RPi and then check CMX to see that all is working. @Mark is the cycle spe...

AndyKF650

The log files for CMX are those in CumulusMX/ MXDiags and if you have the logging in CUtils enabled the log file will be in CumulusMX/utils/utilslog.

Yes attach the files to the reply under the tab marked attachments

AndyKF650

Hi Paul as a first look you seem to be rather behind on the CMX and Cutils versions, not that that should affect your lack of data. More likely the free memory you have looks to be quite small in relation to the data files and also you have a lot of missed data packets maybe down to insufficient mem...

AndyKF650

Hi Hans As you know I have been running CUtils on my RPi with Debian Bookworm for a couple of months now without any real problems. Today when I looked at the overview chart it was blank no data at all.and this was after running the current version for a couple of days. The usual cache clear and ref...

AndyKF650

I changed from HostPresto in August to tsoHost and have had no issues with server drop outs at all.

AndyKF650

Hi there The click behaviour is determined in the CutilsCharts.def file with the command "ConnectsTo " The following snip from my file will hopefully show you the way forward. Look at my website to see the endless possibilities with CUtils that I have constructed over the past few years wi...

AndyKF650

Just a thought but shouldn't the webtag "token=<#DavisReceptionPercent tx=>" contain an extra identifier ie "tx=1"

AndyKF650

I recorded 943.2 mm in Gorey Jersey which is 95 mm above the long term average but my highest recording was 1,080 mm in 2014.

The temperature average for December was 3.1 C above the long term average for December and the annual average temperature was 2.3 C above the long term average for the year.

AndyKF650

A happy New Year to one and all from not so sunny Jersey.

AndyKF650

Hi Wayne

Thanks for the update on the installation of mono onto an RPi 4. The use of the Debian tab within mono download certainly works and my working installation is now much smoother, even the RealVNC works with no issues

AndyKF650

AndyKF650

Hi there

The latest version of mono is at the following url but I am still not convinced that the RPi Bookworm 64bit is supported. Perhaps I can be proved wrong.

https://www.mono-project.com/download/stable/

Cumulus Support

Search found 625 matches

Build 3280 upload error

Re: Instructions: Installing CumulusMX on Raspberry Pi

Re: LOOP: xx - Expected data not received, expected 99 bytes, got 0

Re: LOOP: xx - Expected data not received, expected 99 bytes, got 0

Re: CUtils not reading some data

Re: CUtils not reading some data

CUtils 6.23.2 Overview chart error

Re: CMX unresponsive

Re: Change gauge click behavior

Re: web tag errors after a refresh

Re: New Record? Post here.

Re: Nobody else has - so - HAPPY NEW YEAR!

Re: Raspberry Pi4 Bookworm clean install

Re: Thank You Mark and Happy Christmas to all.

Re: Pi upgraded to bullseye x64