Cumulus Support

spatieman

great,, a other thing i found,, tbh, i didnt payed atention to it, sometime some value stay the same while the realtime.txt is correct. the only thing to fix that is to restart cmx (what at this moment i do with a 2nd script that kills cmx every 6 hours) humidity most of time the isue with the same ...

spatieman

bingo:
new isue on 07:08
here is the logfile and a screenshot.

-edit-
i use a SQlite database editor to "patch" by hand the isues..

spatieman

logging is already active.
but ,eh, what are the filenames i need to look for ?

spatieman

spike removal for indoor temp and humidity is set to 5
as for the location, it is set on a location whit low air flow.
The log time is 1 minute, the station it self updates every 50 seconds.

sometimes this happens for outdoor content to, the spike removal settings are set to 3.

spatieman

i know i have under the calibration settings the spike removal settings pretty correct. but still, 90 times the indoor temp and/or indoor humidity are haveing spikes that make no sence. when i compare the realtime.txt with the data from a other weatherstaton, they are the same.. it is that i have a ...

spatieman

yes.
But for 10 day max, and i messup up way before that...
my mistake, my isue to fix.

spatieman

becouse i messed up here, and forgot to make a copy of the ini file,
Yes, stupid, very stupid...

spatieman

fine tuning the callibration settings,
but a bit stuck on the rainfall settings.
what is the correct and best vallue for it..
i have currently Rain rate spike removal set at 15
and Rain per hour spike removal at 50
Think i have increase it, or set it to zero,
suggestions ?

spatieman

i checked the file i had with all the explanations, your right. this is weard.. my weather station show thecorrect value. i know there is a ofset, but that is only 0.4 here in the cmx config, weard... i need to keep a eye on this, -- edit-- i checked the settings again here.. think i found the bugge...

spatieman

see image.
some values are show correct, ex the outside temp.
on the dashboard it also shows the wrong temp.

spatieman

update works,, for the 1 hour nothing happend, till i did a reset on the weatherstation.
negative temps still not showing up, oh well, atl east i am running the last build hehe.

spatieman

weard isue, and yes i am using a older version, 3.19.0 Build 3191 realtime.txt shows that it is -1.3 celcius here, what is correct. 10-12-22 07:44:56 0.5 88 -1.3 0 0 90 0.0 0.0 983.1 E 0 km/h C hPa mm 0.2 +0.4 0.0 140.1 0.0 19.9 70 0.5 0 0.5 00:00 0.5 00:00 0 03:02 12 06:28 983.2 07:38 981.0 00:00 3...

spatieman

Thank you Mr Mcrossley.
ok, its wishlist isue..

spatieman

masive spikes on the indoor temp, and when i see the calibration settings, there is only a temp offset,

spatieman

just like the outdoor temp settings in calibration.
specialy spike removal option, noticed the last time a lot of unknown spikes in the indoor temp when i select the select-a-graph option CMX
it is that i have a sqllite DB browser/editor ,else i am unable to " cheat " with it.

Cumulus Support

Search found 33 matches

Re: weard isue with spikes...

Re: weard isue with spikes...

Re: weard isue with spikes...

Re: weard isue with spikes...

weard isue with spikes...

Re: proper setting for rainfall callibration section.

Re: proper setting for rainfall callibration section.

proper setting for rainfall callibration section.

Re: CMX not parsing negative values ??

Re: CMX not parsing negative values ??

Re: CMX not parsing negative values ??

CMX not parsing negative values ??

Re: request: indoor temp calibration settings.

Re: request: indoor temp calibration settings.

request: indoor temp calibration settings.